797030
17
Zoom out
Zoom in
Previous page
1/19
Next page
16
GB
5. After the devices have paired and connected, a
confirmation tone will be played on the radio and the
white bar near the top of the radio’s display will show
the message “Bluetooth Connected”.
You can now play music on your Bluetooth device and
stream the music through the radio’s speaker.
Notes:
If 2 Bluetooth devices are pairing for the rst time,
both must search for your radio, it will show its
availability on both devices. However, if one device
links with this unit first, then the other Bluetooth
device won’t nd it on the list.
If you take your Bluetooth device out of range,
the connection between your device and the radio
will be temporarily disconnected. Your radio will
automatically reconnect if the Bluetooth device is
brought back into range. Be aware that during the
period of disconnection, no other Bluetooth device
can pair or link with your radio.
If “WFR-32” shows up in your Bluetooth device list,
but your Bluetooth device cannot connect with it,
please delete the item from your list and pair the
Bluetooth device with the radio again following the
steps described previously.
The effective operation range between the radio
and the paired Bluetooth device is approximately 10
meters (30 feet). Any obstacle between the system
and the device can reduce the operational range.
Bluetooth connectivity performance may vary
depending on the connected Bluetooth device.
Please refer to the Bluetooth capabilities of your
device before connecting it to your radio. Not all
features may be supported, depending on the
Bluetooth device used.
With some mobile phones, making / receiving
calls, text messages, e-mails or any other activities
unrelated to audio streaming may mute the
Bluetooth audio streaming or even temporarily
disconnect from your device. Such behavior is
a function of the Bluetooth device and does not
indicate a problem with your WFR-32.
AUDIO PLAYBACK IN THE BLUETOOTH
MODE
When you have successfully connected your radio with
the chosen Bluetooth device you can start to play your
music using the controls on your connected Bluetooth
device.
1. Once playback has started, the display will show cover
art (if available), the connected Bluetooth device name,
the artist’s name, the track name, the album name and
the playback progress. repeatedly press the Next button
(6) on the radio or Right button (r) on the remote control
to zoom in on the cover art or view it in full screen.
2. Adjust the volume to the required setting using the
Volume control (4) on the radio, the Volume buttons (u)
on the remote control or on your Bluetooth device.
3. Use the controls on your Bluetooth source device to
play / pause and select tracks. Alternatively, playback
can be controlled using the remote control using the
Play / Pause (g), Next track (n), and Previous track
(h) buttons on the remote control or by pressing and
holding the Previous (5) and Next (6) buttons on the
radio to go to the previous or next track.
Note:
Not all player applications or devices may respond to
all of these controls.
AUDIO PLAYBACK FROM A PREVIOUSLY
PAIRED BLUETOOTH DEVICE
The WFR-32 can memorize up to 8 sets of paired
Bluetooth devices. Once more than 8 devices have been
connected, the earliest device with which the radio was
paired will be overwritten in the radio’s memory.
If your Bluetooth source device has previously paired with
the WFR-32 previously, the radio will still remember your
Bluetooth device and attempt to reconnect with the device
that was last connected. If the last connected Bluetooth
device is not available, the radio will try to connect to the
second last Bluetooth device.
DISCONNECTING YOUR BLUETOOTH
DEVICE
To disconnect your Bluetooth device, either turn off
Bluetooth on the Bluetooth device or switch to another
mode on the radio, for instance by tuning into an internet
radio station. If you disconnect the Bluetooth device
when the radio is in the Bluetooth mode, the white bar
near the top of the radio’s display will show “Bluetooth
Disconnected” and the radio will be available for pairing
again.
To connect to a different device, press the pair button on
the remote or apply a long press on the volume control on
the radio.
10. LISTENING TO MUSIC USING THE
AUX IN JACK
You can listen to the sound of an external device through
your WFR-32’s speaker. To do this, follow these steps.
1. Connect the external device (such as iPod, MP3 player
or CD player) to the radio’s Aux-in port (16) using a
3.5mm audio cable (not supplied).
2. Make sure both the radio and the external device are
turned on.
3. Select the AUX option in the radio’s main menu.
4. The audio output of the external device will now be
played through the speaker of your WFR-32. The
volume can be adjusted using the radio’s Volume
Control (4) or the Volume buttons (u) on the remote
control.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-32 in the language / languages: English as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-32

Sangean WFR-32 User Manual - German - 20 pages

Sangean WFR-32 User Manual - Dutch - 20 pages

Sangean WFR-32 User Manual - French - 21 pages

Sangean WFR-32 User Manual - Spanish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info