797014
26
Zoom out
Zoom in
Previous page
1/27
Next page
25
Important:
● The charger may not supply power to some USB devices.
● When not using or after charging, remove the USB cable.
● Do not connect power source to USB port. Otherwise there is a risk of
re. The USB port is only intended for charging lower voltage device.
● Do not insert a nail, wire, etc. into the USB power supply port. Otherwise
a circuit short may cause smoke and re.
● Do not connect this USB socket with your PC USB port, as it is highly
possible that it may cause breakdown of the units.
● Never use the USB socket in rainy or moist conditions to prevent moisture
from entering the radio.
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. When the radio is in power on or standby mode, press and hold the
Info/Menu button until you hear a beep to enter the menu setting.
2. Rotate the Tuning control knob until “FACTORY” appears on the display.
Press and release the Tuning control button, the “RESET NO” will appear
on the display and “NO” will flash. Rotate the Tuning control knob to
select “NO” or “YES”. If you do not wish to carry out a system reset,
select “No” and then press the Tuning control button. The display will
revert back to the previous display.
3. To select “YES”, press and release the Tuning control button. A full reset
will be performed. The station presets will be erased. Alarms will be
cancelled and the sleep timer settings will be set to their default values.
All the icons will show on the display and the radio will turn off automatically.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of the power source may be required) to resume normal
operation.
4. You may also elect to unplug your radio for at least 12 hours to reset
your radio.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean RCR-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-20 in the language / languages: English as an attachment in your email.

The manual is 1.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info