797370
9
Zoom out
Zoom in
Previous page
1/11
Next page
08
GB
F
E
When the alarm sounds
To cancel a sounding alarm, press the Power button.
When the buzzer alarm activates, the buzzer alarm symbol will ash on the display. The alarm will start softly and
gradually increase in level (Humane Wake System). It will sound for 1 minute and silence for 1 minute in repetition for
60 minutes unless cancelled.
When the radio alarm is activated, the alarm will go off in Humane Waking System and the radio alarm symbol will
ash on the display for 60 minutes.
Disabling / cancelling alarm setting
To cancel the radio / buzzer alarm setting before the alarm sounds, press the radio / buzzer alarm button. The display
will show “OFF”. The radio / buzzer alarm symbol will disappear from the display.
Snooze function
When the radio alarm sounds, pressing any button other than the Volume buttons and Power button will silence the
alarm for 5 minutes. When the buzzer alarm sounds, the buzzer alarm can be silenced for 5 minutes by pressing any
button other than the Power button. The display will show the snooze symbol and “Z” will ash on the display. To
cancel the Snooze timer while the alarm is suspended, press the Power button to cancel the alarm.
Sleep function
The sleep timer will automatically switch off the radio after a preset time has elapsed.
1. Press and hold the Power button until the radio beeps. Keep long pressing the Power button and the display will
cycle through the available options of 60-45-30-15-120-90-60 minutes.
2. Release the Power button when the required sleep time appears on the display. The Sleep symbol will show
on the display.
3. To cancel the sleep function, press the Power button. The Sleep symbol will disappear and the radio is switched
off.
Software version / Setting the time format / tuning step
Software version
The software display cannot be altered and is just for your reference.
1. Press the Power button to turn off the radio.
2. Press and hold the Band button until the radio beeps. Software version number (e.g. Pxx) is shown on the display.
Setting the time format / tuning step
1. After the software version is shown on the display, keep long pressing the Band button until the time format (e.g.
12H) is shown the display. Rotate the Tuning control knob to select “12H” or “24H”.
2. Press the select button to conrm the time format setting and enter the AM tuning step setting.
3. Rotate the Tuning control knob to select “10” or “9” kHz. Press the select button to conrm the AM tuning step
setting and enter the FM tuning step setting.
4. Rotate the Tuning control knob to select “100”, “200” or “50” kHz. Press the select button to conrm the FM tuning
step setting.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean PR-D12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean PR-D12 in the language / languages: English as an attachment in your email.

The manual is 1.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info