797367
13
Zoom out
Zoom in
Previous page
1/15
Next page
12
GB
E
3. To cancel the sleep time before the preset time has elapsed and to turn off the radio, press the Power button to
turn the unit off manually. To cancel the sleep timer and leave the radio playing, go back to the sleep timer settings
(step 1 to 2) and select the Off option in step 2.
4. To view the remaining time of an active sleep timer setting, press and hold the Menu button and rotate the Tuning
control knob until “Sleep time” is shown on the display. You can view the remaining time of an active sleep timer
on the display.
Tone controls- treble and bass
You can set up a custom treble and bass setting to your liking.
1. Make sure your radio is turned on. Press the Volume control knob to enter the Treble adjustment mode.
2. Rotate the Volume control knob until the desired level (between -6 and +6) is displayed. The sound will change
as you adjust the level. Press the Volume control knob to conrm the setting. You will enter the Bass adjustment
mode.
3. Rotate the Tuning control knob until the desired level (between -6 and +6) is displayed. Press the Volume control
knob to conrm the Bass setting.
Language
Your radio can be congured to a different language.
1. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “Language”
is shown on the display. Press the Tuning control knob to enter the setting.
2. Rotate the Tuning control knob to select your required language.
3. Press the Tuning control knob to conrm your selection. The display will change to the chosen language.
Auxiliary input socket
A 3.5mm Auxiliary input socket is provided on the left hand side of your radio to permit an audio signal to be fed into
the unit from an external audio device such as an iPod, MP3 or CD player.
1. Press the Power button to switch on your radio.
2. Connect a stereo or mono audio source (for example, iPod, MP3 or CD player) to the Auxiliary input socket
(marked AUX IN).
3. Press the Band button to select AUX IN mode and the display will show AUX IN.
4. Adjust the Volume control on your iPod, MP3 or CD player to ensure an adequate si gnal and then adj ust the
volume on the radio for comfortable listening.
Headphone socket
A 3.5mm Headphone socket located on the left hand side of your radio is provided for use with headphones. Inserting
headphones automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We therefore recommend setting the volume to a
low level before connecting headphones to the radio.
1. Excessive sound pressure from earphones and headphones can cause hearing loss.
2. To prevent possible hearing damage, do not listen at high volume levels for long periods.
IMPORTANT
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDR-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDR-16 in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info