Manual Samsung UE49MU6279 (page 5 of 11) (English)

667846

Zoom out

Zoom in

1/11

15 16

17 18

Flash Power can be adjusted manually. The photographer can set the desired

exposure manually by the most appropriate power in combination with the

aperture value set on the camera. 22 different power, from full power to 1/128

power, by every 1/3 stops are available.

Set the camera mode, to or on your camera.

Set the mode of MG8000. From the 6 icons screen, select

M / Av and set .

Select M and set .

Select your desired power and set .

The camera-subject distance for the most proper exposure

is determined by the film speed (ISO) and the F stop set

on the camera.

This distance is shown in the Manual function screen.

The film speed information (ISO) is automatically

transferred from the camera.

The F. stop you set on the camera is to be set maunally on

the flash unit, too.

To get the camera-subject distance on the display screen,

F. Stop setting is required.

Press set for 2 seconds, the screen goes to the

Advanced Function page.

Move cursor to F.Stop line and continuously select

the same F.Stop number you set on your camera.

Press on/off switch to lock the value. (Press it again to

release the lock)

The distance is automatically followed by changing the

focal length and ISO sensitivity level on the camera, or

selecting another power level.

Manual Power Opertion

As for the non-dedicated or traditional type film

cameras, the film speed (ISO) information is not

transferred from the camera.

In this case, the film speed (ISO) is to be set on the

flash unit to indicate the camera-subject distance.

Move cursor to ISO line at Advanced function page

and continuously select the ISO value to which you set camera.

Press the set button. Or wait for 8 seconds to return to M function

screen.

Set

The reflector position of MG8000 can be set manually.

To get an illumination area different from the picture frame either wider or

narrower field, manual zoom setting makes sense. When using MG8000 with

non-dedicated camera or traditional film type camera, the reflector position of

MG8000 does not respond to the camera lens movement. In this case, use this

Manual Zoom Setting.

Manual Zoom Setting

Set

The mode to be set on the camera: or

2nd (rear) curtain synchronization

Flash usually synchronizes to the camera shutter when it opens (1st curtain

sync.). For the slow shutter photography, MG8000 can be set the flash timing just

before the shutter closes (2nd curtain sync.). By using this function, a moving

subject is imaged with such moving marks behind. Refer the camera owner’s

manual for details.

On the TTL function screen, press the button for 2 seconds.

TTL Advance page appears.

Select ‘Curtain’ by button.

Select ‘2nd’ for 2nd Curtain Sync by button.

Press the button or wait for 8 seconds to return to the TTL function screen.

A symbol ‘>>>’ appears at the upper right hand corner for 2nd Curtain Sync,

while no symbol appears for normal flash sync. (1st curtain)

Set

Hi-Speed Sync

The flash of MG8000 can be set for camera with higher shutter speeds up to

1/8000 second.

On the TTL function screen, press the button

for 2 seconds.

TTL Advance page appears.

Select ‘Hi-Speed’ by button.

Select ‘On’ for High-Speed Sync by button.

Press the button or wait for 8 seconds to return to the TTL function

screen.

A symbol appears at the upper right hand corner for High-Speed Sync

Flash Exposure Bracketing (FEB)

MG8000 supports exposure bracketing function at every 0.3Ev increment

within the range of 3Ev. You will get 3 continuous flash pictures in different

exposure effects on each frame. Set the camera shutter for drive mode and

number of picture frame is to be set on the camera. Refer the camera owner’s

manual for details.

On the TTL function screen, press the button for 2 seconds.

TTL Advance page appears.

Select ‘Bracketing’ by button.

Select ‘On’ for Bracketing by button.

Select your favorite EV step from 0.3 to 3 for

Bracketing by button.

Press the button or wait for 8 seconds to return to the TTL function

screen.

A ‘BKT1’ symbol appears at the upper right hand corner for Bracketing.

Remark:

IMAGE ZONE ( Portrait, Landscape, Close-up,

Sports, Night Portrait) When setting the camera mode to any of

those image zone, MG8000 is automatically set at TTL-AUTO function

mode. In this mode, TTL exposure level compensation can not be

adjusted. All other advance functions are available.

Set

On the TTL function screen, press the set button for 2

seconds.

TTL Advance page appears.

Select M.Zoom and continuously select on and

set or wait for 8 seconds to returns to the TTL function

screen.

Be aware that now your MG8000 will not adjust the zoom

setting automatically when you change the focal length of your

lens until you will have returned to “M.Zoom Off”on the TTL

Advanced page.

Set

9.0

Full Auto,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samsung UE49MU6279 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung UE49MU6279

Samsung UE49MU6279 User Manual - English - 158 pages

Samsung UE49MU6279 User Manual - German - 158 pages

Samsung UE49MU6279 User Manual - German - 157 pages

Samsung UE49MU6279 User Manual - Dutch - 158 pages

Samsung UE49MU6279 User Manual - Dutch - 157 pages

Samsung UE49MU6279 User Manual - French - 157 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samsung UE49MU6279 Manual

Product: