621330
15
Zoom out
Zoom in
Previous page
1/17
Next page
COLOR CCD CAMERA User Guide
28
COLOR CCD CAMERA User Guide
29
Operating Your Camera
- AREA SEL :
You can select up to 12 PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA SEL.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
Select a desired EXIT mode using the Left and Right buttons depending on the camera
purpose.
-SAVE :SavethecurrentsettingsandexittheMAINSETUPmenu.
-NOTSAVE:DonotsavethecurrentsettingsandexittheMAINSETUPmenu.
- RESET : Resets the camera settings to the factory defaults. Language and Monitor
settings are not initialized.
LANGUAGE:Youcanselectthemenulanguageaccordingtoyourrequirements.
RETURN :SelectthistosavetheSPECIALmenusettingsandreturntotheMAIN
SETUP menu.
•
AstheDISfunctionusesthedigitalzoomthecamera'sresolutionwilldecrease.
•
DISdoesn’toperatewhenbackgroundilluminationistoolow.
•
DISdoesn’toperatewhenobjectpatternismonotonicaslikeskyorwhitewall.
Notes
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
EXIT
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
Nothing appears on the screen.
Check that the power cord and line connectionbetween the camera and monitor are
fixed properly.
Check the type of lens.
Check that the lens type is VIDEO lens or DC lens.
The image on the screen is dim.
Is lens stained with dirt? Clean your lens with soft, clean cloth.
Set the monitor to proper condition.
If the camera is exposed to too strong light, change the camera position.
The image on the screen is dark.
Adjust the contrast feature of the monitor.
If you have an intermediate device, set the 75Ω / Hi-z properly.
The camera is not working properly, and the surface of the camera is hot.
Check that you have properly connected the camera to an appropriate power source.
The SENS-UP function does not work.
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
Check that SHUTTER of EXPOSURE SETUP menu is A.FLK’ or ‘MANUAL’.
The Motion Detection function does not work.
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
Color is not correct.
Check the setting of WHITE BAL SETUP menu .
The screen flickers continually.
Check that direction of camera turns toward the Sun.
When coaxial communication is not available:
Make sure that the camera and monitor are installed within the recommended distance.
Use the video amplifier equivalent to coaxitron if the recommended installation
distance is exceeded.
1) WhentheSPECIALmenuscreenisdisplayed,presstheUpandDownbuttonsso
thatthearrowindicates‘PRIVACY’.
 2) Set up the mode using the 4 direction buttons.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCB-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCB-2000 in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info