356625
9
Zoom out
Zoom in
Previous page
1/9
Next page
STORING FOODS
The foods shall be packed with the freshness reservation bag
(film) or put in the sealed container to avoid air-dry
or mix-odour.
Hot foods or beverages shall be cooled to the room temperature
to save power consumption.
The cooked and raw foods shall be placed separately.
The foods shall be kept loose to leave enough space for air cycle.
Note: 1. Do not put the foods near the sensor.
2. The foods and containers shall not lean against the
back wall.
Store foods in smaller portions.
Better clean the washable foods,such as fruits and vegetables
before storage.
The fruits and vegetables shall be stored in the vegetable
compartment to reserve the water and freshness.
NOTES
The tropic fruits such as banana and pineapple are not suitable.
Do not store the items that has strict storage standard, such as
blood serum, bacterin and academic materials.
Recommendation: If you need a large quantity of foods to be stored,
ice making or fast cooling, please take out the freezer drawer and
freeze the foods directly on the evaporator partition.
WARNING
Do not touch the freezer evaporator with wet hands to avoid the water ices
on your hands.
INTRODUCTION TO PCB
8
9
2.Fridge key
2-1.Press the "Fridge" key to setup the refrigerator temperature;
2-2.When pressing the "Fridge" key, the refrigerator temperature will flash and
display the current setup value with beeps. Repressing the "Fridge" key will
enable the change of the setup temperature in the cycle of 5 4 3
7 6 5 for each press;
°C °C °C
°C °C °C
3.Freezer key
3-1.Press the "Freezer" key to display the freezer temperature. The "Fridge" will
go off and the "Freezer" will light up. The display will show the freezer tempe-
rature.
Several seconds later, the display will indicate the refrigerator temperature.
3-2 When the display indicates the freezer temperature, press the"Freezer" key to
exit the freezer temperature and enter the refrigerator temperature;
4-1.Hold down the "Fridge" key for 5 seconds to enter the trim state;
4-2.Under the trim state, repressing the "Fridge" key will enable the trim operation
as per "--" "01" "02" "03" "07" "08" "09" "--";
4-3.If no actions are input for 5 seconds under the trim state, the appliance will
return to the normal work;
4-4.If the temperature setup is changed, it will exit the trim state;
4-5.When trimming the temperature, each press will trigger a beep sound;
4-6.Higher is the value, the setup temperature is lower:
* Trim function is not recommended;
4.Trim function
5.Opening alarm
5-1.When the refrigerator door is open for 2 minutes, an alarm will be heard;
When it is open for 3 minutes, two alarms will be heard; When the door is
open for more than 4 minutes, alarms in the cycle of 1 minute alarm and
2 minutes stop to remind the user of closing the door;
5-2.The alarm will stop when the refrigerator door is closed;
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung rl 26 dcas 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung rl 26 dcas 1 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info