29535
33
Zoom out
Zoom in
Previous page
1/34
Next page
DTB-9405V
DTB-9405V
GB-29GB-28
DIGITAL TERRESTRIAL RECEIVER
GB
TROUBLESHOOTING
Problem Possible cause Solution of the problem
No display LED on Power cord Power cord plug in correctly
the front panel; not plugged in correctly
No power supply
No pictures on the screen Receiver in Standby mode; Set receiver to “On”;
SCART not connected tightly Check connection and correct;
to video output of television;
incorrect channel or video Check channel and video output and
output selected on television correct (TV instruction manual)
No sound Audio cord connected Check connection and correct;
incorrectly;
Volume level = 0; Increase volume on television set;
Muting active Press the MUTE key
Remote Control does not Batteries dead or inserted Point remote control towards the
operate directly incorrectly Receiver.
Replace batteries or insert correctly
Poor picture quality Signal strength too low Check the signal strength in
the “Installation” menu, correct
alignment of your antenna
On-Screen Error Message Antenna cable not connected Check connection and correct;
“Searching for signal” or not tight;
incorrect position of the Check position and correct,
antenna; Check the signal strength in
the “Installation” menu
On-Screen Error Message Receiver not yet set Scanning of in “Installation” menu
“Channel data does not
exist.”
The device, packaging material (e.g. Styrofoam) and the batteries must never
be disposed of with household refuse.
Please obtain appropriate information about the regulations in your community,
and dispose of all refuse in accordance with regulations at the separate
locations provided.
DISPOSAL
OPERATING THE RECEIVER
4.5 System Information
If you have to contact your service provider or a service center
they might ask for information available from this menu.
Place the cursor on this sub menu and press the OK key.
The following will be the on-screen display.
Press YELLOW (ALT) key for help.
4.6 Software Upgrade
You can download and upgrade the system software of the receiver through a specific channel
through a specific channel designated by the broadcaster.
The distributor will provide you with more information about that.
If you select to download a new software version, all your previous settings, access code and
favorite channels etc. will be erased! Downloading may take a while. During downloading, don’t
turn off the receiver.
Press YELLOW (ALT) key for help.
5. Embedded Viaccess
1) Change PIN Code:
Change the PIN Code of the Smartcard, if necessary.
2) Change Parental Rating:
Change the setting for the family filter, if necessary.
NNoottee
: This service is not offered by all channels.
3) Change Lock indicator:
You can change the lock status of the Viaccess Smartcard.
4) Issuer Information:
Here you can call up all information stored on the Smartcard
by the publisher.
5) Authorization:
This option would indicate the authorization status of the Smartcard.
MF68-00376A_GB 11/11/05 11:37 AM Page 28
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung DSB9405V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung DSB9405V in the language / languages: English, Swedish as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info