ŝ85Ş
FAQ
Digimax Reader
9. Select the file type that you want.
Selectable file types : *.TXT,*.HWP,*.DOC,*.RTF
ƈ Please check the following if the USB connection malfunctions.
ƃ To get an image that can be recognised as a text :
- Choose a distance at which the text can be clearly focused.
(700-800 Mega Pixels : 25cm, 500-600 Mega Pixels : 20cm recommended)
- The subject needs to be centered.
- Seek to avoid camera shake to get a good image.
ƃ Refer to the [Help] menu in Digimax Reader for further information.
ƃ Digimax Reader only recognises Korean, English and Russian. When this
program scan texts that don't be printed on the keyboard, the extraction rate
may be down.
INFORMATION
Case 1 The USB cable is not connected or you are using a cable with an
incorrect specification.
ƍ Use a USB cable with the correct specification.
Case 2 The camera is not recognized by your PC. Sometimes, the camera
may appear under [Unknown Devices] in Device Manager.
ƍ Install the camera driver correctly. Turn off the camera, remove the
USB cable, plug in the USB cable again, and then turn on the camera.
Case 3 There is an unexpected error during file transfer
ƍ Turn the camera power off and on again. Transfer the file again.
4. Select the image you want to save as a text file.
* Only an image that was taken with a
SAMSUNG camera can be opened.
5. Click the Area Analysis ( ) icon to scan the
image.
6. Part of the image you selected will be displayed
as shown.
7. Click the Character Recognition ( ) icon.
The part selected in the previous step will be
recognized as text.
8. To save the section as a text,
click the Save ( ) icon. A window as shown
alongside will be displayed.
