629984
14
Zoom out
Zoom in
Previous page
1/32
Next page
XML POWERED MIXERS
14
38. POWER - The POWER indicator lights to indicate that the power in on.
39. Power Amp MODE switch - The MODE switch is used to select one of the
following operating modes: MAIN-MONITOR, MAIN-MAIN or MAIN-BRIDGE
(XML410 only).
CAUTION! Only change the power amp MODE switch when the power is
SWITCHED OFF!
MAIN-MONITOR - With this setting, the MAIN and MONITOR sections can
be used independently. The MAIN bus signal will be sent from the MAIN
(XML410) or MAIN (L+R) (XML610 and XML910), and the MONITOR bus
signal will be sent from the MONITOR jacks.
MAIN-MAIN - With this setting, the two power amp channels can be used
independently. The MAIN bus signal will be output from the MAIN MODE
(XML410) or RIGHT/LEFT jacks (XML610 and XML910 Rear Panel).
MAIN-BRIDGE (XML410 only) - With this setting, the two
power amp channels (1 and 2) will be connected in bridge
mode. Only the MAIN bus signal will be output from the
BRIDGE jack.
40. LOW ENHANCE (XML610 and XML910) - This switch turns on or o the LOW
ENHANCE processing on and o. The LOW ENHANCE boosts the low frequen-
cies at the speaker outputs. Use the LOW ENHANCE for added bass in situa-
tions where you do not have subwoofers.
41. MUTE CH 1–8 (XML610 and XML910) - You can turn o channels 18 on the
XML610 or XML910 using the MUTE CH 1–8 switch. This feature is convenient
to use when you take a break and want to leave all the levels set, so they are
ready when you begin to use your PA system again. The MUTE 18 does not
turn o channels 9/10, and 11/12, and does not turn o the CD/TAPE inputs.
Power Amp Section
The XML series of mixers have a power amplier section which can be congured to operate several ways depending on
whether you need MAIN plus MONITOR ampliers to power your speakers, or if you just need more power for the MAIN
speakers. The section below describes the XML series’ power amp modes.
Controls and Functions
38
40
41
39
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson XML910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson XML910 in the language / languages: English as an attachment in your email.

The manual is 7,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson XML910

Samson XML910 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info