629695
5
Zoom out
Zoom in
Previous page
1/56
Next page
5
MXS2800 Power Amplifier
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Getting Started with the MXS2800
Setting up your MXS2800 amplifier is a simple procedure which takes only a few
minutes:
Remove all packing materials (save them in case your units needs future service) and
decide where the amplifier is to be physically placed—it can be used free-standing
or mounted in a standard 19” rack, requiring a single rack space. When installed,
make sure that both the front and rear panels are unobstructed and that there is good
ventilation around the entire unit.
When making speaker connections, use the Speakon®
output connectors on the rear panel. It is never a good
idea to power up any amplifier that is not connected to
loudspeakers.
To make the signal input connections, use the input connectors on
the rear panel.
On the front panel of the MXS2800, turn both Channel level controls
fully counterclockwise (to their minimum setting). Then connect the
supplied heavy-gauge 3-pin power cable to the rear panel AC input
and to any grounded AC socket.
Turn the Power switch ON.
Apply an input signal to the MXS2800 at or about +4dBu (if sending
signal from a mixer, drive the output meters at approximately 0 vu). While the input
signal is present, slowly raise the Channel level controls until the desired sound level is
achieved.
For the best signal-to-noise
ratio, the MXS2800 should
normally be run with the
Channel Input controls at or
near maximum (fully clockwise)
and the PEAK segments should
light occasionally (but not
frequently) during maximum
levels.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MXS2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MXS2800 in the language / languages: German, French, Italian, Spanish as an attachment in your email.

The manual is 7,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson MXS2800

Samson MXS2800 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info