630003
3
Zoom out
Zoom in
Previous page
1/8
Next page
A direct insertion box, or DI box, converts unbalanced high impedance signals
to balanced low impedance signals. This provides the facility to run long
cables without deterioration of the signal, as well as connecting audio signals
to a mixer’s microphoneinput.
Samson’s S-Max Direct Boxes combines premium sound circuitry with durable,
roadworthy construction to provide high-quality signal connection solutions
for live and studio applications. The Samson MD1Professional Mono Passive
Direct Box offers a variety of DI solutions for live sound and recording appli-
cations. You can connect all kinds of audio signals like those from keyboards,
drum machines, mixers, guitars, and outboard signal processors.
Samson’s STL transformer delivers an extended, flat frequency response,
ultra-low distortion, and eliminates hum and RF interference. The MD1 bal-
anced output provide a clean signal, that is less susceptible to noise when
compared to an unbalanced cable, which allows for running longer lengths of
cables.Another benefit from a balanced connection is CMR (Common Mode
Rejection), which provides cancellation of interference (hums and buzzes),
while leaving the original signal pure.
The THRU jack enables you to tap off the signal from the input and pass the
signal to an amplifier or monitor without affecting the original sound.This can
eliminate the need for miking the guitar amplifier, which in many cases is
preferable, especially as more bands are using in-ear monitors.
With proper care and maintenance, your MD1 will operate trouble-free for many
years. Should your direct box ever require servicing, a Return Authorization (RA)
number must be obtained before shipping your unit to Samson. Without this
number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON
(1-800-372-6766) for an RA number prior to shipping your unit. If your direct
box was purchased outside of the United States, contact your local distributor
for warranty details and service information.
Introduction
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MD1 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info