624005
13
Zoom out
Zoom in
Previous page
1/24
Next page
9
Controls and Functions
Meter Section
37 - POWER LED - indicator
The Power LED will illuminate when the rear panel,
MAIN power switch is turned on.
38 - PHANTOM POWER LED - indicator
The LED will illuminate whenever the Phantom
Power switch is pressed.
39 - PHANTOM POWER – switch
The PHANTOM POWER switch is used to activate
the phantom power on the microphone channels
enabling the use most any condenser microphone.
40- CLIP LEDs
The left and right CLIP LED’s illuminate when the
signal from the selected bus is beginning to reach
a level where distortion occurs. If the CLIP lights
stay on, your mix is too hot and you need to lower
the level control. It is okay for the PEAK light to
occasionally light, however they should go off
quickly and not stay on.
41- LED VU METER
The OUTPUT LEVEL METER allows you to monitor
the level of the signal, which is being sent to the
MAIN OUT jacks when the MAIN MIX Solo button
is pressed down. Depending on the position of the
Meter select switch, the meters will display the MAIN
MIX, mono PFL or Stereo Solo.
42 - PFL – LED indicator
When the PFL LED is illuminated the METER is
displaying the PFL level.
37
38
39
41
43
44
42
40
43 - SOLO – LED indicator
When the SOLO LED is illuminated the METER is
displaying the SOLO level.
44– Meter select switch
The Meter select switch allows you to configure
the Meters for MAIN MIX or PFL and Solo. When the
METER select switch is up, the Solo is displayed.
When the METER select switch is down, the PFL
signal is displayed.
GROUP Output Section
45– GROUP SOLO - switch
The GROUP output’s 1-4 SOLO switch, also known
as AFL or After Fader Listen, allows you to listen to,
or solo, a GROUP send in the headphones. When
any of the GROUP 1-4 SOLO switches are pressed
down, that GROUP’s signal is assigned to the solo
bus and can be heard in headphones plugged in to
the PHONES connector located in the top panel jack
field. This allows you to listen to a GROUP send by
itself, let’s say, to check that a signal is not distorted
before it gets to the connected power amplifier.
Since the SOLO is AFL, the fader will affect the level
you hear in the Solo bus.
48
45
46
47
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson L2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson L2000 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson L2000

Samson L2000 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info