560196
4
Zoom out
Zoom in
Previous page
1/8
Next page
INTRODUCTION TO INDUCTION COOKING
Your SALTER induction hob is made from smooth, easy to clean microcrystal glass. The heat
for cooking comes from a magnetic induction coil which directly heats the base of the pan
with great speed and eciency. Using this system, temperature adjustments can be made
very rapidly, giving you precise control over your cooking.
To be suitable for induction cooking, pans need to be made from a ferrous metal such as
cast iron or steel. Pure copper or pure aluminium pans will not be suitable unless they have
a bonded ferrous base. An easy test is to hold a magnet to the base of the pan. If the magnet
sticks to the pan, the pan will be suitable for induction cooking. For ecient heat transfer, the
base of the pan must also be flat and needs to have a diameter of at least 12cm (24cm max).
See table below:
SUITABLE COOKWARE UNSUITABLE
Base diameter between 12cm and 24cm Base diameter less than 12cm or greater than 24cm
Flat bottom Rounded or uneven bottom
Steel or cast iron (with magnetic base) Aluminium or copper (non-magnetic base)
Stainless Steel (with magnetic base) Ceramic, terracotta or glass (eg pyrex)
PREPARATION FOR USE
• Remove all packaging
• Position the hob on a firm, flat and level work surface, keeping a clear space all around it
for ventilation. Do not place directly below overhanging shelves, curtains or cupboards.
• Plug into a suitable wall socket ensuring that the mains cord will be kept safely out of the
way. The unit will beep and all LEDs will flash once and then enter standby mode, where the
display is blank.
QUICK START GUIDE
Having prepared the product for use (as described above):
• Place a suitable pan, with its contents, onto the hob surface.
• Press the power button. The display will show ‘0‘.
• Press the MANUAL (POWER) button once. The program will start to heat the pan.
• Press the
or buttons at any time to increase or decrease the power level as required
between 200W and 2200W.
• Press the power button to switch o the induction at any time. Including when in CHILD
LOCK mode.
Notes
• It is normal for the fan to keep running for a few minutes after the induction is turned o.
Allow the fan to come to a stop before switching the unit o at the mains.
• The device will enter standby mode if not operated within 2 minutes.
• If the pan you have placed on the hob is unsuitable for induction cooking (see table) then
the unit will beep repeatedly and will switch to ‘E1’ display. Use a suitable pan to continue.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter SDA-IH102BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter SDA-IH102BK in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info