518283
3
Zoom out
Zoom in
Previous page
1/9
Next page
GB
7
GB
6
Weight Reading Only
If you just want to know your weight, follow this sequence:
1. Press scale platform (on one of the corners nearest to you) firmly until you hear a beep
then release
2. Wait until display shows zero.
3. To change to st, kg or lb press button on underside of scale.
4. Stand on platform.
5. Weight is displayed.
Note: weight only readings are not saved for transfer to your computer.
Personal Data Entry
To enable you to take weight & body analysis readings you first need to enter your personal data.
Step 1: Determine Your Fitness Level
We all know that physical activity is important for our overall health, and the Salter MiBody is
designed to be customised to reflect your level of physical activity. Please select the description
below that best describes your lifestyle at the present time.
SCALE OPERATION
Fitness Mode One: This category is for people who exercise lightly or infrequently (for
example, less then 20 minutes of light aerobics one or two times a week). Most people will fall
into this category.
Fitness Mode Two: If you engage in moderate activity for about thirty minutes, three
to five times a week, select this category.
Fitness Mode Three: This category describes a person who is highly active, engaging in
60 minutes of moderate to vigorous exercise five times a week.
Most people should initially set their Salter MiBody at Fitness Mode 1.After about two months of
incorporating more exercise into your healthy lifestyle, you should change to setting to Mode 2. Mode 3
should be selected only after you have consistently increased your activity levels for two to three months.
Helpful Hints:
Be honest! You owe it to yourself to get the most accurate information!
Always progress one mode at a time (don’t jump from Mode 1 to Mode 3).
Allow for at least two months of consistent activity before changing a fitness mode.
Step 2: Enter Your Personal Data
To change to st, kg or lb follow ‘Weight Reading Only’ sequence above.
1. Press ON/SET to activate the set-up procedure.
2. The user number flashes. Select a user number between 1-12 (please note memory 0 is for a
guest and is not saved) using and buttons. Press ON/SET button to confirm.
3. Male or female icon flashes.Adjust gender using and buttons. Press ON/SET button
to confirm.
4. Height flashes. Adjust height using and buttons. Press ON/SET button to confirm.
5. Age flashes. Adjust age using and buttons. Press ON/SET button to confirm.
6. Fitness level flashes. Adjust fitness level using and buttons. Press ON/SET button
to confirm.
7. The user number flashes.
8. Press START button.
9. Wait while scale confirms user settings and then displays zero.Allow scale to switch to
clock mode.
10. Repeat procedure for a second user, or to change user details.
Note: To update or overwrite the memorised data, follow the same procedure, making changes
as required.
Weight & Body Analysis Readings
Each user can save up to 30 sets of results to the scale.The bar chart icon on the scale display
indicates the user memory status.
To change to st, kg or lb follow ‘Weight Reading Only’ sequence above.
Position the Salter MiBody on a flat level surface.
1. Press ON/SET button.
2. Select your user number using and buttons.
3. Press START button.
4. Wait while scale confirms user settings (and if applicable displays your previous results).
5. Zero is displayed.
6. Step on to scale with BARE FEET
.
7. Your weight is displayed.
8. Wait.Your weight is displayed again (you can step off the scale now) followed by your BMI, body
fat, body water, muscle mass, visceral fat and BMR.
9. Your results are repeated (to toggle between results press the , , ON/SET
or START buttons).
10. Your results are saved to the scale memory.
11. The scale returns to clock mode.
Note: If FULL is displayed then the memory is full.You need to transfer your results to the USB
flash drive, otherwise your earliest results will be overwritten.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter Mibody at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter Mibody in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info