560310

Salter BPW-9154 MiBody Manual

3
Zoom out
Zoom in
Previous page
1/256
Next page
GB
3
CAUTION
• Please do read this user manual carefully and thoroughly before use.
• This device is intended for adult use only.
• This device is intended for non-invasive measuring and monitoring of asterial blood pressure. It is not intended for
use on extremities other than the wrist or for functions other than obtaining a blood pressure measurement.
• Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood pressure. Please
start or end medical treatment basing solely on physician’s treatment advice.
• If you are taking medication, consult your physician to determine the most appropriate time for your measurement.
Never change a prescribed medication without your physician’s consent.
• This unit is not suitable for continuous monitoring during medical emergencies or operations.
• If the pressure of the cu exceeds 40 kPa (300 mmHg), the unit will automatically deflate. Should the cu not
deflate when its pressure exceeds 40 kPa (300 mmHg), detach the cu from the wrist and press the START/STOP
button to stop inflation.
• Do not use the monitor under the conditions of strong electromagnetic field (e.g. medical RF equipment) that
radiates interference signal or electrical fast transient / burst signal.
• The maximum temperature that the applied part can be achieved is 42.5ºC while the environmental temperature is
40ºC.
• The device is not AP/APG equipment. It is not suitable for use in the presence of a flammable anaesthetic mixture
with air (or oxygen, nitrous oxide).
• Please keep the unit out of reach of infants or children, since inhalation or swallowing of small parts is dangerous
or even fatal.
• Please use ACCESSORIES and detachable parts specified / authorised by MANUFACTURER. Otherwise, it may cause
damage to the unit or danger to the user / patient.
Symbol for “THE OPERATION GUIDE
MUST BE READ”
The Bluetooth Combination Mark
Symbol for “COMPLIES WITH
MDD 93/42/EEC REQUIREMENTS”
Symbol for “TYPE BF APPLIED PARTS”
Symbol for “MANUFACTURER”
Symbol for “ENVIRONMENT
PROTECTION - Wast electrical products
should not be disposed of with
household waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling
advice”
Symbol for “SERIAL NUMBER” Symbol for “DIRECT CURRENT”
0120
SAFETY INFORMATION
The below signs might be in the user manual, labeling or other components. They are the requirement of standard and
using.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter BPW-9154 MiBody at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter BPW-9154 MiBody in the language / languages: All languages as an attachment in your email.

The manual is 37,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info