689976

Salter BNM10 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
IB-BNM10-GB-1217-01
INSTRUCTIONS FOR USE:
IMPORTANT - Preparing the appliance for use
The Shiatsu Massager comes with a screw located on the back of the unit to
protect the massage mechanism during shipment, which must be removed
before the rst use to allow the shiatsu feature to function. Use the
provided Allen key. Then, properly dispose of the screw.
WARNING Error: all remote control LEDS ash for a few seconds.
Cause: massager overloaded.
Solution: ensure the allen key bolt/screw has been removed from back of
the massage cushion (using the allen key included). Should the condition
continue after this please contact your HoMedics service centre.
Failure to remove screw may cause permanent damage to the
appliance.
Strapping System
This massage cushion incorporates a unique strapping system which allows
you to fasten it to almost any chair. Just slip the straps over the seat or
chair and adjust fastening straps to secure. Your massager won’t slip or
slide away.
MAINTENANCE:
Cleaning
Unplug the appliance and allow to cool before cleaning. Clean only with a
soft, slightly damp sponge.
• Never allow water or any other liquids to come into contact with the
appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint
thinner etc to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place. Avoid contact
with sharp edges or pointed objects which might cut or puncture the
fabric surface. To avoid breakage, DO NOT wrap the power cord around the
appliance. DO NOT hang the unit by the cord.
Note:
Do not use this product for more than 15 mins at a time. There is a 15
minute auto shut-o on this appliance for your safety. This feature should
not be considered as a substitute for ‘OFF’. Always remember to switch the
appliance o when not in use.
PRODUCT FEATURES:
DEMO BUTTON - For a brief
demonstration of the features of
the Massager, press the Demo
button. The unit will briey
go through each function.
Once complete, the unit
automatically turns o. The LED
light will blink to indicate the
active functions.
SPOT SHIATSU - While the unit
is in Shiatsu massage, press
either button to stop and focus
the Shiatsu action in one place.
Once the unit is operating in
Spot Shiatsu, you may adjust the
mechanism position by holding
down either button until the
desired position is reached.
SHIATSU MASSAGE - Shiatsu
is a deep kneading circular
massage.
SHIATSU PROGRAMS – Choose
from 3 preset programs where
the Shiatsu massage travels up
and down in a specic area of
the back. To select a program,
simply press the button and the
LED will illuminate. To deselect,
press the button again or press
another button.
Full back
Upper back
Lower back
POWER BUTTON - To turn on the
unit, rst press the POWER button.
The LED indicator will illuminate
and conrm your selection. To
turn o the unit, simply press the
button again. The LED indicator
will blink while the back massage
mechanism returns to its lowest
point and then it will turn o.
NECK MASSAGE – Click this
button to add a neck massage.
VIBRATION MASSAGE – Adds
vibration massage to upper legs/
thighs. Pick your favourite intensity
for a more relaxing or invigorating
massage.
HEAT - For soothing heat when
massage is on, simply press the
heat button and the corresponding
red L.E.D. light will illuminate. To
deselect, press the button again
and the corresponding L.E.D. light
will turn o. For your safety, heat
cannot be turned on if massage is
not selected.
MOVING SHIATSU MECHANISM
FKA Brands Ltd
Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK
Customer Support: +44(0) 1732 360783 | support@salterhousewares.co.uk
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter BNM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter BNM10 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info