689922
3
Zoom out
Zoom in
Previous page
1/35
Next page
GB
5
GB
4
1. Select the relevant memory - While power is off, press
the
/buttons to toggle between memory locations.
When you have selected your memory location, press
Mode to confirm.A beep sounds.
This action can also be performed when power is on.
2.
R icon will be displayed, and the stored information for
that memory location is displayed.
3. When the display shows zero, step on the scale with
bare feet. Stand still while the unit measures your weight.
The weight will display for 2 seconds. Remain standing
on the scale.
4. As the scale measures your Body Fat, you will see the
following pattern:
5. A long beep indicates that your measurement is
complete. Remain standing on the scale, until your
body fat percentage is shown on the top row of the
display.Your current weight will be shown on the next
row, and the status bar will show your Body Fat
condition (low, normal, etc.).
TAKING YOUR BODY FAT READING
M
3
4
5
Always weigh yourself on the same scale placed on the same floor surface.
Do not compare weight readings from one scale to another as some differences will
exist due to manufacturing tolerances.
Placing your scale on a hard, even floor will ensure the greatest accuracy and consistency.
Weigh yourself at the same time each day, before meals and without footwear.
First thing in the morning is a good time.
Your scale rounds up or down to the nearest increment.
If you weigh yourself twice and get two different readings, your weight lies between the two.
Clean your scale with a damp cloth. Do not use chemical cleaning agents.
Do not allow your scale to become saturated with water as this can damage the electronics.
Treat your scale with care - it is a precision instrument. Do not drop it or jump on it.
ADVICE FOR USE AND CARE
1. Press the centre of the
platform firmly to activate
the scale.
2. Remove foot from platform
and WAIT for display to
show a zero reading.
3. Step on scale and stand
very still until your weight
reading is displayed.
WEIGHT READING ONLY
66.2
1. While power is off, press the /buttons to toggle between memory locations.
2. If the selected memory is occupied, press both /buttons at the same time to clear the content
of the selected memory.
TO RESET MEMORY
1. Follow steps 1-3 in Personal Data Entry.
2. When the display shows zero, step onto the scale with bare feet.
BODY FAT MEASUREMENT WITHOUT MEMORY
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter 9120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter 9120 in the language / languages: All languages as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info