560278
2
Zoom out
Zoom in
Previous page
1/20
Next page
2
GB
HOW DOES THIS SALTER SCALE WORK?
This Salter scale allows eective weight management through Goal Tracking.
This scale stores the personal data of up to 8 users. As well as Goal Tracking this
scale can be used as a conventional scale.
NEW FEATURE!
This scale features our convenient step-on operation. Once initialised the scale can
be operated by simply stepping straight on the platform – no more waiting!
PREPARING YOUR SCALE
1. Open the battery compartment on the scale underside.
2. Insert batteries (4 x AAA) observing the polarity signs (+ and -) inside the battery
compartment.
3. Close the battery compartment.
4. Select kg, st or lb weight mode by the switch on the underside of the scale.
5. For use on carpet remove the non-slip pads from the scales feet and attach
enclosed carpet feet.
6. Position scale on a firm flat surface.
INITIALISING YOUR SCALE
1. Press the platform centre and remove your foot.
2. 0.0’ will be displayed.
3. The scale will switch o and is now ready for use.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.
WEIGHT READING ONLY
1. Step on and stand very still while the scale computes your weight.
2. Your weight is displayed.
3. Step o. Your weight will be displayed for a few seconds.
4. The scale will switch o.
DISPLAY GUIDE
SET GOAL WEIGHT
1. Press button. User number will flash. Press
s
or
t
as necessary to select
your user number, press to confirm.
2. Goal Weight will flash. Press
s
or
t
as necessary to set your goal weight,
press to confirm.
3. Your goal weight is set and then the scale will turn o.
4. Repeat the procedure for a second user, or to change user details.
WEIGHING WITH GOAL TRACKER
1. Press button. User number will flash. Press
s
or
t
as necessary to select
your user number.
2. Wait until 0.0 is displayed.
3. Step on and stand very still while the scale computes your weight.
4. Your Weight is displayed for a few seconds followed by Goal Weight and Goal
Weight Dierence.
Note: The Goal Weight Dierence is shown as follows:
#
A up arrow shows weight above goal weight.
$
A down arrow shows weight below goal weight.
If no Goal Weight is set ---- will be displayed. To set Goal Weight see SET GOAL
WEIGHT section above.
WEIGHT HISTORY RECALL
The scale can store the last 4 results for each user. To view the results history:
1. Press button. User number will flash. Press
s
or
t
as necessary to select
your user number.
2. Wait until 0.0 is displayed.
3. Press and hold unit switch for 3 seconds to enter recall mode.
4. M1, Weight and Goal Weight Dierence will be displayed.
5. Press
s
or
t
to view M1-M4.
Note: If a memory location has no record ---- will be displayed.
RESET MEMORY
1. Follow steps 1-3 above to enter WEIGHT HISTORY RECALL.
2. Press and hold
s
and
t
together for 3 seconds to enter reset mode.
3. RE:SET will be displayed.
4. Press
s
or
t
as necessary to select YES or NO. Press to confirm.
5. If YES selected scale shows ---- then will turn o.
6. If NO selected scale turns o.
WARNING INDICATORS
Err Unstable weight. Stand still.
O-Ld Weight exceeds maximum capacity.
Lo Replace battery.
ADVICE FOR USE AND CARE
Always weigh yourself on the same scale placed on the same floor surface.
Do not compare weight readings from one scale to another as some
dierences will exist due to manufacturing tolerances.
Placing your scale on a hard, even floor will ensure the greatest accuracy and
repeatability.
Weigh yourself at the same time each day, before meals and without footwear.
First thing in the morning is a good time.
Your scale rounds up or down to the nearest increment. If you weigh yourself
twice and get two dierent readings, your weight lies between the two.
Clean your scale with a damp cloth. Do not use chemical cleaning agents.
Do not allow your scale to become saturated with water as this can damage
the electronics.
Treat your scale with care - it is a precision instrument. Do not drop it or jump on it.
TROUBLESHOOTING GUIDE
If you experience any diculty in the use of your scale:
Check the battery is correctly fitted.
Check that you have selected your preference of stones/pounds, kilograms or
pounds.
Check that the scale is on a flat, level floor and not touching against a wall.
If when you use the scale there is no display at all or if ‘Lois displayed - try a
new battery.
If ‘O-Ld’ is displayed the scale has been overloaded.
WEEE EXPLANATION
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your
used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental
safe recycling.
GUARANTEE
This product is intended for domestic use only. Salter will repair or replace the
product, or any part of this product, (excluding batteries) free of charge if within
15 years of the date of purchase, it can be shown to have failed through defective
workmanship or materials. This guarantee covers working parts that aect the
function of the scale. It does not cover cosmetic deterioration caused by fair wear
and tear or damage caused by accident or misuse. Opening or taking apart the
scale or its components will void the guarantee. Claims under guarantee must be
supported by proof of purchase and be returned carriage paid to Salter (or local
Salter appointed agent if outside the UK). Care should be taken in packing the
scale so that it is not damaged while in transit. This undertaking is in addition to a
consumer’s statutory rights and does not aect those rights in any way.
For UK Sales and Service contact HoMedics Group Ltd, PO Box 460, Tonbridge, Kent,
TN9 9EW, UK. Helpline Tel No: (01732) 360783. Outside the UK contact your local
Salter appointed agent.
Weight
User number
Memory position
Goal weight/
Goal weight dierence
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter 9063 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter 9063 in the language / languages: All languages as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info