491244
3
Zoom out
Zoom in
Previous page
1/24
Next page
GB
5
GB
4
1. Select kg, st or lb weight mode by pressing the ‘UNIT/UP’ switch on the underside of the scale.
2. Position scale on firm flat surface. (For use on carpet remove the non-slip pads from the scales feet
and attach the enclosed carpet feet).
3.Tap the platform centre (vibration activates your scale) and remove your foot.
4.Wait until zero is displayed.
5. Step on and stand very still while the scale computes your weight.
6.Your weight is displayed.
7. Step off.
8.Your weight is displayed for a few seconds then the scale will display the clock.
OPERATING YOUR SCALE
‘----’ Weight exceeds maximum capacity.
‘Lo’ Replace battery.
WARNING INDICATORS
Always weigh yourself on the same scale placed on the same floor surface. Do not compare weight
readings from one scale to another as some differences will exist due to manufacturing tolerances.
Placing your scale on a hard, even floor will ensure the greatest accuracy and repeatability.
Weigh yourself at the same time each day, before meals and without footwear. First thing in the
morning is a good time.
Your scale rounds up or down to the nearest increment. If you weigh yourself twice and get two
different readings, your weight lies between the two.
Clean your scale with a damp cloth. Do not use chemical cleaning agents.
Do not allow your scale to become saturated with water as this can damage the electronics.
Treat your scale with care - it is a precision instrument. Do not drop it or jump on it.
ADVICE FOR USE AND CARE
If you experience any difficulty in the use of your scale:
Check the battery is correctly fitted.
Check that you have selected your preference of stones/pounds, kilograms or pounds.
Check that the scale is on a flat, level floor and not touching against a wall.
If when you use the scale there is no display at all or if ‘Lo’ is displayed - try a new battery.
If ‘----’ is displayed the scale has been overloaded.
TROUBLESHOOTING GUIDE
This product is intended for domestic use only. Salter will repair or replace the product, or any part of
this product, (excluding batteries) free of charge if within 15 years of the date of purchase, it can be
shown to have failed through defective workmanship or materials. This guarantee covers working
parts that affect the function of the scale. It does not cover cosmetic deterioration caused by fair wear
and tear or damage caused by accident or misuse. Opening or taking apart the scale or its
components will void the guarantee. Claims under guarantee must be supported by proof of purchase
and be returned carriage paid to Salter (or local Salter appointed agent if outside the UK). Care
should be taken in packing the scale so that it is not damaged while in transit. This undertaking is in
addition to a consumer's statutory rights and does not affect those rights in any way. For UK Sales and
Service contact HoMedics Group Ltd, PO Box 460,Tonbridge, Kent,TN9 9EW, UK. Helpline Tel No:
(01732) 360783. Outside the UK contact your local Salter appointed agent.
GUARANTEE
1.The scale features a 24 hour clock. To enter clock set mode insert new batteries or press and hold
‘SET’ for 3 seconds.The hour digits will begin to flash.
2. Press ‘UNIT/UP’ button to set hours. Press and hold to advance quickly.
3. Press ‘SET’ to confirm. The minute digits will begin to flash.
4. Press ‘UNIT/UP’ button to set minutes. Press and hold to advance quickly.
5. Press ‘SET’ to confirm.
TO SET CLOCK
1. Open the battery compartment on the scale underside.
2. Insert batteries (2 x AAA) observing the polarity signs (+ and -) inside the battery compartment.
3. Close the battery compartment.
4. Scale enters clock set mode.
PREPARING YOUR SCALE
9034_IB.qxd:Layout 1 28/4/09 16:58 Page 4
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salter 9034 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salter 9034 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info