748196

Salora CR627USB Manual

15
Zoom out
Zoom in
Previous page
1/17
Next page
EN
2
Battery back up
The clock time and alarm (if set) can be maintained during a power failure by 2 x AAA/ LR03
batteries (not supplied).
Once the power is restored, check the time to make sure it is accurate and re-set if necessary.
Inserting the Batteries
1. Open the battery compartment at the bottom of the unit by pressing on the catch and
removing the cover.
2. Insert 2 x AAA/ LR03 batteries (preferably alkaline batteries) into the battery compartment,
following the polarity as shown on the diagram inside the compartment.
3. Replace the battery compartment cover.
Setting the clock and alarm
Setting the clock
1. Press and hold the TIME (12) button and the hour/minute digits will flash.
2. Use the HOUR (10) button to set the hours.
3. Use the MINUTE (11) button to set the minutes.
4. Press the TIME (12) button again to confirm the clock time setting and the hour / minute
digits will become solid.
Setting the alarm
Before setting the alarm time, make sure the clock has been set.
1. The unit remains in the standby mode.
2. Press and hold ALARM 1 (7) / ALARM 2 (6) button for 2 seconds and the hour / minute digits
will flash.
3. Press the HOUR (10) button to set the hours.
4. Press the MIN (11) button to set the minutes.
5. The unit will then return to the clock time display after 5 seconds.
Using the alarm function
This unit allows you to wake up by buzzer or radio.
1. The unit remains in the standby mode.
2. To adjust the alarm time, follow the steps in “Setting the clock and alarm”.
3. To select the buzzer or radio mode for ALARM 1, press the ALARM 1 (7) button repeatedly.
The corresponding AL1 buzzer Indicator (2) or AL1 radio Indicator (2) will light up on the
LED display.
4. To select the buzzer or radio mode for ALARM 2, press the ALARM 2 (6) button
repeatedly. The corresponding AL2 buzzer Indicator (5) or AL2 radio Indicator (6) will
light up on the LED display.
5. When the preset alarm time is reached, the alarm will sound in the selected alarm buzzer
mode or radio will sound in the selected alarm radio mode.
6. To stop the alarm, press the ON/OFF (8) button. The alarm will sound again at the
same time the next day.
7. To disable the alarm function, press the ALARM 1 (7) or ALARM 2 (7) button repeatedly
until the selected buzzer indicator or radio indicator disappears.
… 15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salora CR627USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salora CR627USB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info