576453
2
Zoom out
Zoom in
Previous page
1/2
Next page
- 14 -
8-6 MANAGING THE RECORDING LIST
The coloured keys A, B, C and D are used to manage the recording list.
8-6-1 Erasing a recorded programme or list
A (red key): To erase the selected programme or the entire list (confirmation banner).
It is impossible to erase the entire list if a recording is in progress.
8-6-2 Accessing the complete list
The locked recorded programme are hidden in the standard list. Press B (green key) to display the complete
list. The code to access locked programmes is then requested.
8-6-3 Merging recordings
Press C (yellow key) to merge two recordings. Use the C key to successively select the two programmes to
be merged. A confirmation window is displayed. The second recording will be placed directly after the end of
the first recording and the new recording will adopt the name of the longest recording.
8-6-4 Renaiming a record
Press D key (blue key) to rename a record.
Enter a new name using the alphanumeric keypad on the remote control unit (for example, press key 2 for
letter A, press key 2 twice quickly for letter B, etc....).
8-6-5 Erasing a portion of a recording
Another function can be used to:
Erase a portion of a recording from the beginning to a point that is determined manually,
Erase the portion of a recording between two points that will be determined
Erase the portion of a recording between the current playing position and the end of the recording.
Cut a recording into two parts.
- 15 -
To do this, select a recording from the recording list, read it and press at the desired location. Then press
the key to display the banner and for more information.
In CUT, select between:
at begin: the part of the recording between the beginning and the
selected place will be erased
in the middle: the part of the recording between the selected place
(index) and the next position will be erased. To select the other end
of the part to the erased, validate [in the middle], then move using
, , and to the second marker. Then repeat the
operation
,
,
and validate [in the middle] again to cut
the selected zone.
at end: the part of the recording between the selected place and the end will be erased.
in two parts: the selected recording is cut into two parts that are called ‘1 recording name’ and ‘2
recording name’.
8-7 SAVING A RECORDING ON ANOTHER MACHINE
Connect your video recorder, for example, via the AUX Scart socket.
Select this input on your video recorder.
Select play mode on the receiver and record mode on the video recorder.
Then refer to your video recorder instruction manual for the procedure to follow.
- 16 -
9. PHOTO EDITOR
This equipment only exists for the PVR6600T version.
9-1 CARE INFORMATION
The unit is designed to accept formats CFI and CFII, SM (Smartmedia), MS (Memory Stick), MSPRO
(Memory Stick Pro), SD (Secure Digital), MMC (MultiMediaCard) and xD.
These cards must be inserted in the correct slot for the model as indicated in the drawing. Failing this,
the card reader and cards may be damaged or the data stored in the cards may be lost.
Only one card must be inserted in the card reader at a time.
Don’t remove card during picture transfer.
9-2 STARTING THE PHOTO EDITOR
You can access the photo editor by:
inserting a memory card,
pressing the key
on the remote control unit.
The photo player can only display photos in jpeg format (basic format only).
Photo mode cannot be accessed when a scheduled recording is in progress
Smart Media
TM
Card
SD Memory
MMC
Memory
Stick and
Memory
Stick PRO
DUO or
DUO PRO
with
adaptator
Microdrive
TM
&
Compact flash
TM
xD Picture Card
- 17 -
Function of the remote control unit keys in PHOTO MODE
FONCTIONTOUCHES
Help
- 18 -
9-3 READING AND TRANSFERRING A PHOTO ALBUM FROM A
MEMORYCARD
9-3-1 Creating and transferring the photo album
Insert the card. It then becomes visible in the list of albums and photos that are displayed as thumbnails.
Press the C key (yellow) to copy the album to the hard disk.
You can copy the entire album stored on your card as a new album or
place it in an album that already exists in your Photo editor. To do this,
select the required destination with the arrow keys , , ,
and confirm.
If you decide to create a new album, it’s default name will be the date
when the oldest jpeg file stored on the card was created. If you want to
give it a different name, enter a new name using the alphanumeric keypad on the remote control unit (for
example, press key 2 for letter A, press key 2 twice quickly for letter B, etc.).
Of course, you can view the photos without copying them onto the hard disk. When you remove the card, the
card’s folder will disappear from the photo album.
9-3-2 Reading the photo album
To read a photo album, regardless of whether or not it is recorded on the hard disk, press the key on the
remote control unit when it is selected.
The player then displays thumbnails of the photos.
If the card does not give the thumbnails, they will not be displayed, but this does not stop you from recording
the photos and viewing them in the photo album.
You can go back to the list of photo albums at any time by pressing .
- 19 -
9-3-3 Different photo viewing modes
Thumbnail mode:
The navigation keys are used to reach the photo to be displayed. You
can then display the photo full screen by pressing .
Keys and are used to scroll forwards or backwards through
the pages.
Key
is used to switch to Slideshow mode.
Photo full screen mode:
The navigation keys are used to scroll through the photos one by one
or manually forwards or backwards. You can obtain information on the
picture and display the help banner using the key . Press this key
again to remove this information.
Slideshow mode:
Press key in thumbnail mode to start slideshow mode. The photos
are displayed at a determined speed. To adjust the slideshow mode
settings, press the key . A SLIDESHOW SETTINGS screen is
displayed that can be used to change various settings. The help banner
is used to access other functions (see screen opposite). This banner
disappears after a few seconds without any action. You can also obtain
information on the picture and display the help banner using the
key
.
You can go back to the previous mode or the list of photo albums
at any time by pressing .
9-3-4 Importing a picture via the USB port
You can also connect a USB picture storage device such as a USB key.
It is connected to USB port A to be able to read or transfer photos, in the same way as for a memory card.
For USB data, all the files are viewed at the same level (the tree structure is flattened) and all the jpeg files
will be read.
- 20 -
9-4 MANAGING ALBUMS
You can rename an album, read or edit information on this album, or delete an album.
The data on the memory card cannot be modified.
Press the A key (red) to delete an album.
Press the B key (green) to rename an album.
Enter a new name using the alphanumeric keypad on the remote
control unit (for example, press key 2 for letter A, press key 2 twice
quickly for letter B, etc.).
Press the key
to display or edit information on an album.
To access information on an album, press the key . You can now
edit the information on this album by pressing the D key (blue). Then
enter the text required using the alphanumeric keypad on the remote
control unit (for example, press key 2 for letter A, press key 2 twice
quickly for letter B, etc.).
9-5 MANAGING PHOTOS
You can transfer photos between albums, rename photos, sort them
and print them. When reading a photo card, only select and transfer
functions are available.
Press the D key (Blue) to access Photo management.
To select or unselect a photo: Press .
To select several photos: Press the B key (green) during two seconds
to select the first photo and press it once to select the last photo in the
group. All the photos between these two photos are then selected. The
key is used to add or remove photos in your selection. By pressing the B key (green) again, you can add
a new selection to your initial selection.
To transfer selected photos in an album: Select the destination for the photos by selecting an album and
pressing the D key (blue).
To copy or move selected photos between albums: Press the C key (yellow). Then choose to transfer or copy
into another album or a new album that is created specifically for this purpose.
To delete one or more selected photos: Press the A key (red).
- 21 -
To rename a photo: Press then . Proceed in the same way as for renaming an album see
“MANAGING ALBUMS”, page 20..
To sort photos :
Select the photos to move. Place the cursor to the new position using keys or . Press the key D.
The photos are moved to the new position.
9-6 PRINTING
You can print a photo album on a printer (for example, SAGEM PHOTO EASY) by connecting it to USB port
B. In this case, the printer takes control of your receiver.
9-6-1 Selecting the photos to be printed via the Receiver
Scroll through the photos on your Receiver.
Select the photos by pressing the key . The printer icon is
displayed on the picture to indicate that it is selected.
Unselect the photos by pressing the key .
Finally, connect the printer to USB port B. The printer then takes control
of the receiver (The printer must manage the preselected files for printing).
Each time the Receiver is placed in standby, the preselection file for printing is erased.
9-6-2 Selecting the photos to be printed via a Printer
Select your photos directly via the printer that will then import them.
PHOTO
PRINTER
Port B
- 22 -
10. EVERYDAY USE
10-1 SELECTING A TELEVISION CHANNEL
10-1-1 Using the keys and , or keys 0-9
Press the keys or to change channel or enter its number on the numeric keypad on the remote control
unit to access the desired channel directly.
It is possible to go back to the channel previously viewed by pressing the key .
10-1-2 Using the channel list
Press the key to display the channel list, select your channel then press again to validate.
It is possible to go back to the channel previously viewed by pressing the key .
10-1-3 Channel information banner
Each time you select a new channel, an information banner is displayed
on the screen.
The quality and quantity of information does not depend on your receiver.
It is supplied by the actual channels.
The banner display time and level of transparency can be set in User
preferences:
A Channel number and name
B Name of programme
C Favourite list
D Number of audio tracks and subtitles
E AC3 audio
F Start time of programme
G Elapsed time
H End time of programme
I Current time
10-1-4 Extended information banner
If you want more information on the current programme and the following
programme, press the key
on your remote control unit.
Press again or to delete the information banner.
- 23 -
10-2 SELECTING A RADIO CHANNEL
If this service is supplied by your operator.
Press the key
to switch to RADIO mode.
Press
to switch back to VIDEO mode.
10-3 ADJUSTING THE AUDIO VOLUME LEVEL
Volume: The volume level is adjusted using the keys and .
Mute mode: The sound is cut if you press the key . The sound is restored if you press the same key again.
The sound on the AUX Scart socket and Hi-Fi and digital audio outputs is not affected by these operations.
10-4 CHANGING THE FAVOURITE LIST
Press to display the screen. Press the D key (Blue) to scroll through the lists.
A new favourite list can also be created in the FAVOURITE CHANNEL LIST.
10-5 TEMPORARILY SELECTING AUDIO LANGUAGES AND SUBTITLES
Press to display the extended information banner.
Press to display the AUDIO banner.
Press and to select the audio and subtitle languages.
Temporary settings are not maintained after zapping.
10-5-1 Audio language / sound track
Select the language in the audio list proposed. All modifications are taken into account immediately.
10-5-2 Subtitle language
Select the language in the Subtitle list proposed. All modifications are taken into account immediately.
10-6 TELETEXT
If this service is supplied by your operator.
Press the key on your remote control unit to access Teletext mode.
To access the Teletext pages, use the numeric keys or press the keys and .
10-7 TV / VCR SWITCH
Press the key on your remote control unit to toggle the video recorder signal so that it is sent directly to the
television. This function is only possible if the devices are connected together via a Scart lead.
- 24 -
10-8 ELECTRONIC PROGRAMME GUIDE
If this service is supplied by your operator.
Press the key to access the electronic programme guide.
Select a channel in the list to obtain information on the current programme on this channel. A video of the current
program is displayed in the top left.
In the same way, other information on the various forthcoming programmes is available.
Programmes may be recorded using the electronic guide (cf. chap. 8.3).
- 25 -
11. CONNECTING A COMPUTER
Only version PVR6600T has USB ports.
A computer (for example, a PC) can be connected to USB port B.
The photo partition of the Receiver is seen as a removable mass memory
on your computer. It is then possible to rename photos and albums, move
photos between albums and transfer them to and from the computer.
To view the changes made on the Receiver, place your equipment in
standby.
When you unplug the receiver from a computer, do it correctly: select “Remove the removable device”
in the menu bar on your PC.
12. UPDATING THE SOFTWARE
The receiver enters this mode when a new software version is supplied on the network after start-up.
The system goes back into standby and then restarts by itself.
A welcome picture is displayed.
Then the “Software update” screen opens.
You can postpone the downloading process by pressing the EXIT key. This process will be displayed again next
timeyou switch your receiver on.
Downloading starts when you press the key:
The screen becomes black.
The display indicates the download phases (0 to 4).
The user cannot carry out any operation during this process during some minutes (5 to 10).
Once the process is complete, the receiver will switch on automatically.
After the receiver has switched itself on, press the key to quit the welcome screen and go back to the last
programme watched.
Port B
- 26 -
13. PERIPHERAL CONNECTIONS
14. REFERENCE
14-1 TROUBLESHOOTING
The remote control unit has no effect on the
receiver.
Point the remote control unit towards the receiver.
Check the condition and orientation of the batteries.
The receiver displays - - : - -. Take the receiver out of standby by pressing .
A black screen or an error message is
displayed.
Carry out a programme search.
Picture motion less or reception problem. Check all the connections and start a programme
search again.
The receiver cannot find any channels. Check that you are in a broadcast area.
Readjust your antenna (cf. Quick Installation chapter).
The television does not switch to the receiver
when it leaves standby mode.
Check that your television is connected to the TV Scart
socket and if required, select the Scart input directly on
your television.
No sound in "HOME CINEMA" mode on some
channels.
Check that you are connected to a "HOME CINEMA"
amplifier with a digital link.
Connecting auxiliary equipment (e.g. video
recorder) for a television with a Scart socket.
Connecting an audio amplifier, using a stereo lead
(Jack 3.5 mm to two RCA), or using a fibre optic
lead (IEC958). Fibre optic connexion is mandatory
to profit from a "HOME CINEMA" system.
Connecting auxiliary equipment (e.g. video
recorder) for a television with a Scart socket.
Connecting an analogue decoder with a Scart
socket.
- 27 -
14-2 SPECIFICATIONS
*PVR 6600 photo only.
Black and white video on AUX output
(VCR recording).
Some recordings are not listed in the recording
list.
Check that AUX Scart signal is compatible with your
VCR. Select PAL type.
Check that the records are not loaded. In this case they
will appear only in the full list see “Accessing the
complete list”, page 14.
Transmission Standards
DVB-T, MPEG 2, OFDM
Tuner
RF Input
Input Connector: IEC 169-2 female
RF input frequency range:
UHF 470-862 MHz (8 MHz BW)
VHF 174-222 MHz (8 MHz BW)
RF input level: -90 to -20 dBm
Input impedance: 75 Ohms
COFDM bandwidth: 8 MHz
Tuning step: 166.66 kHz
RF output
Output connector: IEC 169-2 male
RF bypass: 47-862 MHz
Demodulator
COFDM modes supported: 2 k/8 k
Support: SFN
Modulation: QPSK, 16-QAM, 64-QAM
Code rate: 1/2 to 7/8
Mode: Non-hierarchical
Guard interval: 1/4, 1/8, 1/16, 1/32
De-interleaver: 12x17 Forney
Error-correcting code: RS (204,188, 8)
Hard disk
Capacity/Recording :
40 GB, PVR 6240T up to 20 hours
80 GB, PVR 6280T up to 40 hours
160 GB, PVR 62160T up to 80 hours
80 GB, PVR 6680T up to 37 hours
and 7.000 pictures
160 GB, PVR 66160T up to 75 hours
and 15.000 pictures
80 GB, PVR 7200T up to 40 hours
160 GB, PVR 72160T up to 80 hours
Noise level (Typ): <30dBA
Microprocessor and memories
Processor: IBM Power PC(r) CPU
252 MHz, 350 MIPS
RAM: 32 MB
Flash memory: 2 MB
Demultiplexing/Descrambling
ISO/IEC 13818-1 standard compliant
Video receiver
MPEG-2 (ISO/IEC 13818-2)
Profile and level supported:
MP@ ML
Input rates: 1.5 to 15 Mbit/s
Aspect ratios: 4:3 and 16:9
Video Resolutions:
720x576, 704x576, 544x576,
480x576, 352x576, 352x288
Conversion:
Pan and Scan, Letterbox
Resizing and Zoom:
up/down (1/4, 1/16)
Audio Receiver
ISO/IEC 13818-3 standard compliant
MPEG-Layer I and II (Musicam Audio)
Mode: Mono, Stereo, Joint Stereo
Sampling frequencies: 32/44,1/48 kHz
A/V Input/Output
TV SCART
RGB, CVBS, Audio stereo
AUX SCART
RGB input, CVBS, S-video output,
Audio analog Hi-Fi stereo
3.5 mm stereo jack
Audio digital output
PCM stereo or AC3, IEC958 optical
Computer ports*
‘Host’ USB 2.0 connector (USB key)
‘Device’ USB 2.0 connector (PC,
Photo printer)
Photo card reader*
Standards supported:
Compact Flash I & II, Secure Digital
Smartmedia, MultiMediaCard,
Memory Stick, Memory Stick Pro
xD Picture Card
External power supply
AC: 220-240 V ~50 Hz
Output: 12 V DC 3.5A
Max power consumption : 18 W
(standby 9.5 W)
Front panel
1 seven-segment amber display
IR sensor: 38 kHz
Physical Specifications
Receiver:
Size (lxdxh): 315x230x45 mm
Weight: ~1.75 kg
Operating temperature: +5°C to
+40°C
Complete packaged receiver:
Weight: ~2.7 kg
Size (lxdxh): 247x236x80 mm
Storage temperature: -25°C to +65°C
Accessories
41-key remote control unit Range: 7 m
Batteries: 2 x 1.5 V (AAA type)
1 Scart lead
External AC/DC adapter with power
cable
- 28 -
14-3 GUARANTEE
ATTENTION
In order to apply the guarantee, you should contact your dealer
or Sagem Communication helpdesk at 0905 77 48 081*.
Proof of purchase will be required. Should any malfunctioning arise,
the dealer or Sagem Communication helpdesk will advise you what to do.
If you bought your equipment from Sagem Communication directly, the following shall apply:
1) Sagem Communication undertakes to remedy by repair, free of charge for labour and replacement parts, any defects
in the equipment during a period of twelve (12) months from the date of original delivery of the equipment, where those
defects are a result of faulty workmanship.
During this twelve-month guarantee period, the defective equipment will be repaired free of charge; the customer must
however return the defective equipment in its original package with all accessories at his/her own expense, to the
address given by Sagem Communication After Sales Department, the phone number of which can be found on the
delivery slip. Unless the customer has concluded with Sagem Communication a maintenance contract for the equipment
which specifically provides for repairs to be carried out at the customer's residence, the repairs will not be carried out
on the equipment at the customer's residence.
The following sentence applies to purchases of equipment for the customer's trade, business or profession.
Except as otherwise expressly provided in this Document and to the extent permitted by law, Sagem Communication
makes no representations or warranties, express or implied, statuette or otherwise, and to such extent, all terms and
conditions implied by law are hereby excluded.
This guarantee does not affect the Customer's statutory rights.
2) Exclusions from Guarantee
SAGEM shall have no liability under the guarantee in respect of:
damage, defects breakdown or malfunction due to:
- failure to properly follow the installation process and instructions for use, or
- an external cause to the equipment (including but not limited to, lightening, fire, shock or water damage of any
nature),
or
- modifications made without the written approval of Sagem Communication, or
- a failure or neglect to maintain the equipment or inappropriate maintenance, or
- unsuitable operating conditions, particularly of temperature and humidity, or
- repair or maintenance of the equipment by persons not authorised by Sagem Communication, or
- the removal and/or destruction of the label positioned on the fixation screw of the lower plastic cover,
wear and tear from normal daily use of the equipment and its accessories,
damage due to insufficient or bad packaging of equipment when returned to Sagem Communication,
supply of new versions of software,
work on any equipment or software modified or added without the prior written consent of Sagem
Communication,
malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of
use of the equipment,
- 29 -
communication problems related to an unsuitable environment, including:
- problems related to access and/or connection to the Internet such as interruptions by access networks or
malfunction of the line used by the subscriber or his correspondent,
- transmission faults (for example poor geographical coverage by radio transmitters, interference or poor line
quality),
- the local network fault (wiring, servers, workstations) or the failure of the transmission network,
the normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to
servicing not being carried out, servicing costs are in any event always borne by the customer.
* 0.15 £/min, tariff cost effective form 06/27/2005.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagemcom PVR 6600T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom PVR 6600T in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info