Manual Sagemcom ITD 64 (page 30 of 32) (English)

576447

Zoom out

Zoom in

1/32

- 24 -

7. USING YOUR SET TOP BOX

7-16 GUARANTEE (TERMS AND CONDITIONS)

ATTENTION

In order to apply the guarantee, you should contact your dealer

or Sagem Communication helpdesk at 0905 77 48 081

(0.15 £/min, tariff cost effective form 27/06/2005).

Proof of purchase will be required. Should any malfunctioning arise,

the dealer or Sagem Communication helpdesk will advise you what to do.

If you bought your equipment from Sagem Communication directly, the following shall apply:

1) Sagem Communication undertakes to remedy by repair, free of charge for labour and replacement parts, any

defects in the equipment during a period of twelve (12) months from the date of original delineavit of the

equipment, where those defects are a result of faulty workmanship.

During this twelve-month guarantee period, the defective equipment will be repaired free of charge; the

customer must however return the defective equipment at his/her own expense, to the address given by

Sagem Communication After Sales Department, the phone number of which can be found on the delivery

slip. Unless the customer has concluded with Sagem Communication a maintenance contract for the

equipment which specifically provides for repairs to be carried out at the Customer'splace, the repairs will not

be carried out on the equipment at the Customer's place.

The following sentence applies to purchases of equipment for the customer's trade, business or profession.

Except as otherwise expressly provided in this Document and to the extent permitted by law, Sagem

Communication makes no representations or warranties, express or implied, statuette or otherwise, and to

such extent, all terms and conditions implied by law are hereby excluded.

This guarantee does not affect the Customer's statutory rights.

2) Exclusions from Guarantee

Sagem Communication shall have no liability under the guarantee in respect of:

• damage, defects breakdown or malfunction due to:

- failure to properly follow the installation process and instructions for use, or

- an external cause to the equipment (including but not limited to, lightening, fire, shockor water damage

of any nature), or

- modifications made without the written approval of Sagem Communication, or

- a failure or neglect to maintain the equipment or inappropriate maintenance, or

- unsuitable operating conditions, particularly of temperature and humidity, or

- repair or maintenance of the equipment by persons not authorised by Sagem Communication,

• wear and tear from normal daily use of the equipment and its accessories,

• damage due to insufficient or bad packaging of equipment when returned to Sagem Communication,

• supply of new versions of software,

• work on any equipment or software modified or added without the prior written consent of Sagem

Communication,

• malfunctions not resulting from the Equipment or from software installed in user workstations for the

purpose of use of the equipment,

• communication problems related to an unsuitable environment, including:

- problems related to access and/or connection to the Internet such as interruptions by access networks

or malfunction of the line used by the subscriber or his correspondent,

- transmission faults (for example poor geographical coverage by radio transmitters, interference or poor

line quality),

- the local network fault (wiring, servers, workstations) or the failure of the transmission network,

• the normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning

due to servicing not being carried out, servicing costs are in any event always borne by the customer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sagemcom ITD 64 in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagemcom ITD 64

Sagemcom ITD 64 Quick start guide - English - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sagemcom ITD 64 Manual

Product: