521627
53
Zoom out
Zoom in
Previous page
1/57
Next page
44
Appendix
Caution - The gauge card displays on the screen, after each printing, the percentage of remaining ink ribbon. If
the gauge is not installed or not properly installed, the unit displays: .
If you forgot to change the gauge at the same time as the ribbon, the unit displays: .
7
MISSING GAUGE
GAUGE EMP
T
The screen remains blank. Check that the power cord is correctly connected on both its si-
des.
The machine does not answer the
call.
Check the reception mode.
Check the number of rings (please refer to § Number of rings
for the automatic mode on page 17).
Configure the machine on "private network" (please refer to
§ Network on page 16).
The printed photocopy is blank. The document was placed upside down in the document feeder.
The telephone exchange does not
recognise the number you have cal-
led.
Check that the telephone line cord is correctly connected to the
device.
Check the telephone line and the phone outlet.
The machine does not ring. Restore ringing (please refer to § Ringing melody and key
beeps on page 15).
The telephone does not work. Check that the power cord is correctly connected on both its si-
des.
There may be a power failure.
Check the telephone line and the phone outlet.
One or several vertical black strips
appear on the documents copied or
received by your party.
Open the front cover and clean the scanning device (analysis)
located in front of the white roller with a soft lint-free rag soa-
ked with alcohol. After cleaning, close the front cover and
make a copy to check that the black strips have disappeared.
The gauge card housing has unclip-
ped.
You may easily put it back into place: approach the gauge card
housing, striations downwards, and position both axes towards
the slots of the housing lower part, then push until clipping
(please refer to § Replacement of consumables on page 41).
The screen displays:
Put paper into the paper feeder.
Close the rear cover.
Open the rear cover to access the paper path and remove the
sheet of paper. Make sure the rear cover is properly closed af-
terwards.
The last printed documents show a lot of black smears, the
printer temperature is too high. Wait a few minutes for it to co-
ol.
You probably forgot to replace the gauge when you replaced
the printer ribbon.
OUT OF PAPER
PRINTER COVER
REMOVE PAGE
OVERHEATING
GAUGE EMPTY
LIASSE 23690427-6.book Page 44 Lundi, 10. décembre 2001 3:56 15
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem Phonefax 2720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem Phonefax 2720 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sagem Phonefax 2720

Sagem Phonefax 2720 User Manual - German - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info