521757
7
Zoom out
Zoom in
Previous page
1/132
Next page
User guide 3
ENG
INSTALLATION AND MANUAL SETUP (VIA THE WEB SETUP
INTERFACE)
When you do not have many units to set up, it is recommended to set
up the ATA through the Web interface. This setup mode allows you to
set up your Sagem Fax ATA 101S simply and quickly.
Accessing the Web setup interface
1. Connect the LAN RJ45 connector located at the rear of the unit
directly to your computer via a crossed cable, or to a Hub/Switch
via a straight cable.
2. Set up your network card so that it is located in the same IP
network as the LAN connection socket of your Sagem Fax ATA
101S.
You can use the following default IP settings:
IP address: 192.168.134.10
Sub-network mask: 255.255.255.0
Default gateway: blank
Note
This method is recommended when installing and
setting up 1 to 10 units.
Important
Make sure to use a Hub/Switch that is not
connected to your computer network. This will
avoid any IP address conflicts.
Sagem_Fax_ATA101S.book Page 3 Jeudi, 21. février 2008 5:09 17
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem ATA 101S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem ATA 101S in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info