Manual Sage BEM800 - the Scraper Mixer Pro (page 3 of 26) (English)

617954

Zoom out

Zoom in

1/26

4 5

PAge heAder..... PAge heAder.....WE RECOMMEND SAFETY FIRST

• Carefully read all

instructions before operating

the bench mixer for the ﬁrst

time and save for future

reference.

• Remove and safely discard

any packaging material and

promotional labels before

using the bench mixer for the

ﬁrst time.

• To eliminate a choking

hazard for young children,

remove and safely discard the

protective cover ﬁtted to the

power plug of this appliance.

• Do not place the bench mixer

near the edge of a bench

or table during operation.

Ensure the surface is level,

clean and free of water and

other substances. Vibration

during operation may cause

the appliance to move.

• Do not use the bench mixer

on a sink drain board.

• Do not place the bench

mixer on or near a hot gas or

electric burner, or where it

could touch a heated oven.

• Always ensure the bench

mixer is completely

assembled before operating.

Follow the instructions

provided in this book.

• Ensure the speed control

dial is in the OFF position

and the bench mixer is

switched off at the power

outlet and the power cord is

unplugged before attaching

the beater, whisk or

dough hook.

• Do not use attachments other

than those provided with the

bench mixer. Use only the

beater whisk and dough hook

supplied with the mixer.

• The maximum dough this

machine can mix is 600

grams ﬂour plus 375ml

water. If your recipe is more

than this, machine must be

rested after 3 minutes of

use to avoid overloading the

motor.

• Do not operate the appliance

continuously on heavy loads

for more than 3 minutes.

None of the recipes in this

book are considered a

heavy load.

• Handle the bench mixer and

attachments with care. Never

place your ﬁngers inside

the mixing bowl or near the

beater, whisk or dough hook

during operation.

WE RECOMMEND SAFETY FIRST

• Keep hands, hair, clothing,

as well as, spatulas and other

utensils away from moving

beater, whisk or dough hook

during operation.

• Should an object such as a

spoon or spatula fall into

the bowl while mixing,

immediately ensure the

speed control dial is in the

OFF position, turn the bench

mixer off, unplug at the power

outlet and remove the object.

• Do not place hands in the

mixing bowl unless the bench

mixer is disconnected from

the power outlet. Ensure the

speed control dial is in the

OFF position, the bench

mixer is switched off and

unplugged from the power

outlet before removing the

beater, whisk or dough hook.

• Ensure the motor and

beater, whisk or dough hook

have completely stopped

before disassembling.

• Always remove the

beater, whisk or dough

hook from the bench mixer

before cleaning.

• Care should be taken when

removing the food from

the mixer bowl by ensuring

the motor and the beater,

whisk, or dough hook have

completely stopped before

disassembling. Ensure the

speed control dial is in the

OFF position, the appliance

is switched off at the power

outlet and unplugged before

unlocking the mixer motor

head and moving into the

upright position. The beater,

whisk or dough hook should

be released from the mixer

motor head before removing

the processed food from the

mixer bowl and the beater,

whisk or dough hook.

• Ensure the mixer motor head

is locked into the horizontal

(closed) position when not in

use and before storing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sage BEM800 - the Scraper Mixer Pro in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sage BEM800 - the Scraper Mixer Pro Manual

Product: