Manual Saeco RI 9913- SUP 016 E (page 51 of 53) (English, German, French, Italian)

459484

Zoom out

Zoom in

1/53

DESCALING

Clean the coffee beans container periodically;

this operation should be accomplished

by a qualified technician! Unplug the

machine.

Empty the coffee container and unloose the two

fastening screws. Now, the container can be

removed and cleaned.

Carefully pull the adjustment lever upwards,

previously writing the set grinding degree.

Turn the adjustment ring counterclockwise, until

the blue marks coincide.

Now, it is possible to remove the grinding ring

from the machine, slightly pulling it upwards.

With the aid of a brush or a narrow vacuum hose,

clean both the gear box and the grind ring

support.

Make sure the position of the grind ring does not shift.

To reassemble the coffee grinder, carry out the

reverse sequence, making sure the adjustment

ring has not been shifted during cleaning. If that

is the case, turn it until the blue mark coincide with

one of the three notches.

Assemble the grind ring support and make sure

the blue marks coincide.

Turn the adjustment ring clockwise, to make the

red marks coincide.

Fit the adjustment lever on the ring, until it

coincides with the previously set grinding degree.

100

Cappuccinatore

To quickly clean the cappuccinatore, immerse

the suction pipe into warm water and let water

flow through it.

For a more accurate cleaning, remove the

cappuccinatore and open cover (29). Clean the

outside part with warm water and rinse it with

cleaned water.

Descaling

Warning: The descaling operations

mus be carried out when the machine

components are cold.

Descaling removes limescale from all surfaces

and holes, thus ensuring a perfect operation of

valves, heating controls and other important

parts.

Note: due to the complexity of the coffee

machine hydraulic circuit, the following descaling

cycles (automatic and standard) do not allow the

descaling of all tubes.

In fact, easily accessible components

such as the central unit (22) and its

plastic connection are excluded.

The machine must be descaled every 3-4 months,

depending on the water hardness degree.

A more frequent descaling is recommended

wherever the water hardness degree is very high.

To avoid dangerous delays to users, this machine

is supplied with a special control counter,

reminding the user to perform this operation,

according to the water hardness degree.

In this case, the following message will be

displayed:

"DESCALE "

When this message is displayed, the machine

does not stop; however, it is suggested to

descale quickly the machine.

To cancel the message, see programming menu

indications, page 86.

The machine has been adjusted on a 25°òH

value, which causes the warning light to switch

on after 150 l approx.

Should it be necessary, the water hardness value

may be exactly programmed, following the

instructions shown at page 88.

The following adjustments are possible:

Hardness 4: high water hardness, over 29°òH

(14°dH), i.e. 80 l water approx.

Hardness 3:medium water hardness, approx.

20-29°òH (7-14°dH), approx. 150 l water

passage.

Hardness 2:soft water, approx. 12-20°òH

(4-7°dH) approx. 300 l water passage

Hardness 1:very soft water, less than 10°òH

(3°dH), approx. 500 l water passage

In hard water regions, a filter should be used

both to improve the coffee quality or to protect

the machine, thus reducing the descaling

frequency.

Note: for this purpose, use a descaling product

suitable for coffee machines.

Never use vinegar!

Descaling can be performed in two ways:

Automatic descaling

Select this mode in the programming menu (see

page 90).

By means of keys

, move the asterisk at

the end of the line on the menu item Descaling

and confirm the selection with the ENT key.

The following message will be displayed:

"DESCALING "

Pour a discaling solution into the water tank

(according to the instructions on the product

package). Switch the machine on the programming

mode. Place a large container under the steam/

hot water spout and open slowly the steam knob.

The automatic descaling starts: Small amounts of

descaling solution are pumped into the circuit.

Then the pump stops to let the solution take effect.

During this phase, the following message is

displayed:

"MACHINE IS "

"DESCALING "

After approx. 45 minutes, when the procedure is

accomplished, the following message will be

displayed:

"DESCALING "

"FINISHED "

Close the steam knob. The pump stops.

Press ENT button. A display message reminds

you to rinse away any possible descaling residues

from the machine.

"RINSE MACHINE "

Remove water tank, rinse it accurately and fill it

with fresh water. Turn the steam knob slowly on

and let all the contents come out. The following

message will be displayed:

"RINSING "

"FINISHED "

Close the steam knob. Go back to programming

function by pressing the ENT key.

Note: By pressing the ESC key (hot water key),

it is possible to quit descaling procedure.

DESCALING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Saeco RI 9913- SUP 016 E in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Saeco RI 9913- SUP 016 E Manual

Product: