670257
1
Zoom out
Zoom in
Previous page
1/2
Next page
54 6 7
1 2 3
Quick Installation Guide
Network Video Recorder
Model: SAB2000A
V1.0
WARNING
Before installing a hard disk drive (HDD), please make sure the power
is disconnected from the NVR.
Find the
antistatic gloves from the package of the NVR and wear the
gloves.
It is recommended that a hard drive be used in 7200 high-speed or
above.
Power cable
HDD
Data cable
It is recommended to use SATA type of hard disk for recording.
Note
1. Remove the cover from the NVR by unfastening the screws on the
rear and side.
2. Connect one end of the data cable and power cable to the
motherboard of NVR and the other end to the HDD.
3. Place the HDD on the bottom of the device and then fasten the
screws on the bottom to x the HDD.
4. Re-install the cover of the NVR and fasten screws.
Internet users
IP Camera
Power Switch
Power Supply
HDMI Video Output
VGA Video Output
USB Interfaces
DC 12V
POWER
HDMI
VGA
LAN
USB
ALARM N1
1 2 3 4
NO
C
Alarm IN Alarm OUT
Router
Internet users
Procedure
1. Connect your display to one of the video outputs (VGA or HMDI
interface).
2. Connect an external storage device to the USB interface of the NVR as
a backup.
3. Connect a mouse to the USB interface.
4. Connect an alarm input device and an alarm output device to the
alarm input interface and alarm output interface respectively.
5. Some devices need to connect to your router using an Ethernet cable,
including the NVR, PC, IP Camera.
6. Connect the power adapter to the power input port.
NVR
USB Mouse
DC Power Adapter
Screw Pack
Antistatic Gloves
Data Wire and Power Wire of the Hard Drives
Quick Installation Guide
CD
Ethernet Cable
1. Turn on the power switch on the rear panel.
After the NVR starts up successfully, the Power LED and HDD LED
indicators will turn green. The startup page is displayed on the screen.
2. Login page.
Select the Language, Enter the Username and Password, then click
on the Login button.
Default username is
admin with no password
Package Contents
1 Before You Start
2 Hard Disk Installation
3. For the initial log in, the system will prompt you to change your
password. Once done, click the OK button.
4. After modifying the password, you will be taken to the Setup
Wizard.
1. Setting the time. If you don’t want to use the Setup Wizard next
time, uncheck the Setup Wizard checkbox. Click the Next button.
2. Select the HDD you would like to use, then click the Format Hard
Disk button to set up the HDD. Note that this will delete all les on
the HDD.
Select a protocol depending on which IP Camera you have.
H.264 protocol: The High Denition(HD) IP Cameras for private.
ONVIF protocol: IP Cameras which support ONVIF protocol.
3. You can add an IP Camera that is connected to the internet on the
NVR.
You can congure the following information for your IP Camera.
The Setup Wizard can walk you through some important settings on
the NVR.
Input a new password,
then click OK.
1. Select Your IP Camera
2. Click Add
3 Device Connection
4 Log In 5 Setup Wizard
Uncheck the checkbox
2. Click Format Hard Disk
3. Click Next
1. Select your HDD
Format Hard Disk
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB NVR2000A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB NVR2000A in the language / languages: English as an attachment in your email.

The manual is 9,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SAB NVR2000A

SAB NVR2000A User Manual - English - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info