628423
1
Zoom out
Zoom in
Previous page
1/2
Next page
Spindle
(H0471-S)
Main Blade Grip Assembly ....x2
Note
:
Large ID Inside
Button Head Cap
Screw M6x10mm
(HC122-S)
Oring
(HC353-S)
Washer
6x
12x1mm
(HC193-S)
Washer
11x
13.8x0.5mm
(H0226-S)
Thrust Bearing
8x
14x4mm
(HC437-S)
Center Hub Assembly
Radius Arm
(H0474-S)
Socket Shouder
M4x24mm
(HC111-S)
Flanged Bearing
3x
7x3mm
(HC402-S)
Flanged Bearing
2.5x
6x2.5mm
(HC400-S)
Spacer
(H0134-S)
Main Blade Grip
Assembly
Bearing
8x
14x4mm
(HC417-S)
Approx. 62.5mm
Radius Arm
Assembly ... x 2
Uniball M3
(H0063-S)
Swashplate
Assemly
(H0475-S)
Uniball
(H0065-S)
Linkage Rod A Assembly . . . .x3
Linkage Rod A
Assembly
(After a few flights, please check the preload
you can add HC228 if the preload has changed.)
(Initial length for the rods from the
swashplate to the Blade Grip.)
(to adjust the tracking,
turn this linkage.)
H0489M_Rev01
Socket Head Cap
Screw M3x12mm
(HC062-S)
Pin 4 mm
(H0472-S)
Socket Head Cap
Screw M2.5x5mm
(HC017-S)
Uniball M3
(H0065-S)
Socket Head Cap
Screw M3x8mm
(HC050-S)
[H0225-S]
Socket Head Cap
Screw M2.5x8mm
(HC022-S)
Spacer Arm
(H0416-S)
Flanged Bearing
2.5x
6x2.5mm
(HC400-S)
Radius Arm
Assembly
Swashplate Assemly
Uniball Radius Arm
(H0415-S)
Socket Head Cap
Screw M2.5x8mm
(HC022-S)
Socket Head Cap
Screw M3x12mm
(HC062-S)
Radius Arm
Assembly
Spacer
(HC176-S)
M3x20mm
[HC082-S]
M3x12mm
[HC062-S]
Nut M3
[HC206-S]
[HC176-S]
Please read this user manual carefully, it contains instructions for the correct assembly of the KIT.
Please refer to the website www.goblin-helicopter.com for updates and other important information. Thanks You.
Metrix Head
Nylon Nut M4
(HC212-S)
Blade
Washes
(H0265-S)
eg: Microlube GL261
Flanged Bearing
3x
7x3mm
(HC402-S)
Center Hub
(H0473-S)
Damper
(H0425-S)
Uniball M3
(H0065-S)
Note:
Please add thread
locker to the M6x10 screws
Approx
52.5mm
Plastic Ball Link
(H0066-S)
Plastic Ball Link
(H0066-S)
Linkage Rod M2.5x33mm
(H0237-S)
Bearing
8x
14x4mm
(HC417-S)
Main Blade Grip
(H0202-S)
[HC228-S]
Page 1
HPS3 ROTOR HEAD
[
H0489-K Goblin 500, H0490-K Goblin 570
]
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division Head HPS3 - H0489-K Goblin 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division Head HPS3 - H0489-K Goblin 500 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info