- Please take a moment to register your kit online via our web site at:
http: //www.goblin-helicopter.com
It is extremely important that you take a moment to register your helicopter with us.
This is the only way to ensure that you are properly informed about changes to your kit, such as
upgrades, retrofits and other important developments.
SAB Heli Division cannot be held responsible for issues arising with your model and will not provide
support unless you register your serial number.
TO ASSEMBLE THE TAIL BOOM PROPERLY YOU MUST
- Tighten the nylon bolt.
The tool included in the kit ( Part #HA016) is designed to provide the proper amount of torque with
your bare hands. Please tighten the bolts firmly with this tool!
CARBON FIBER PARTS
- The edges of the carbon frames are very sharp.
Use sandpaper to soften the edges, specially in areas where wires are routed as well as in areas
where the battery Velcro straps come in contact with the carbon.
BLADE GRIP AXIAL PRELOAD
-
We recommend assembling without shims for sport flying. However, for 3D flight or high RPM, the best
setup is assembling with at least one shim between the damper and bearing.
After approximately 20/30 flights, please manually check the head dampening, you can add one 0.1mm
shim (HC450) if the dampening feels loose.
TAIL BELT TENSION
- The belt must be very tight!
If the model is making strange noises, this can be usually attributed to incorrect belt tensions.
Check the belts again and tighten if necessary.
CANOPY RELEASE
- The grommet hole on the canopy is about 5mm.
The canopy grommet works best with a 10mm hole.
You can enlarge the hole slightly to optimize the vertical position of the canopy itself.
You can check page 25 of the manual for more information.
[HC450]
[HC096]
[HC124]
MAIN SHAFT PLAY
- Very carefully check to make sure you can turn the main shaft freely. If you feel too much friction,
you have used too many shims, you can remove a shim until the shaft turns freely.
PROPER LUBRICANTION IS REQUIRED
- Use synthetic grease in the damper area, Orings, Spindle. ( Such as Microlube GL261 ).
Apply a little bit of grease to the one way bearing inside the main pulley.
It is always recommended to regularly use a lubricant spray, such as WD40 to prevent
corrosion of steel parts, such as main and tail shaft, etc.
[HC164]
[HC062]
[H0078]
The items outlined in this document should be checked regularly and particularly after a crash
A20-Rev01
[HC462]
GOBLIN 380
TIPS FOR PROPER ASSEMBLY
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for SAB Heli Division Goblin 380 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of SAB Heli Division Goblin 380 in the language / languages: English as an attachment in your email.
The manual is 2,83 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.