Manual Saab 9-3 - 2002 (page 216 of 256) (English)

530432

216

Zoom out

Zoom in

1/256

216 Car care

When it is time to raise the car, apply the

jack to one of the four jacking points (front or

rear) located beneath the sills.

If a floor jack is used it can be applied to the

standard jacking points used by the dealer

or centrally under the front of the engine

subframe. If the car is equipped with a trailer

hitch, the jack can also be placed under the

hitch.

1 Put the car in 1st gear (automatic trans-

mission: move selector to the P position)

and apply the parking brake.

Saab 9-3 Viggen: The front and rear

jacking points are located behind covers

that must be removed. See page 217.

2 Wind the jack up to a suitable height

before placing it under the recess in the

sill.

3 Make sure that the jack fully engages

the recess in the sill and that the base of

the jack is steady and flat on the ground.

4 Turn the jack handle clockwise until it

just begins to lift the car.

5 Remove the wheel cover (where appli-

cable). Loosen the wheel bolts by half a

turn.

6 Turn the jack handle to raise the wheel

clear of the ground. Remove the wheel

bolts and lift off the wheel.

7 Clean the contact surfaces between the

rim and hub.

8 Fit the wheel and screw in the bolts in the

sequence shown (opposite pairs).

Tighten the studs enough for the studs

and wheel to be seated correctly.

See page 218 for sequence.

9 Lower the car and tighten the wheel

bolts to the correct torque in the

sequence shown (opposite pairs).

Tightening torque:

Light-alloy wheels: 80 ft.lbs (110 Nm).

Steel wheels: 80 ft.lbs (110 Nm)

NOTE

• Do not position the jack under the rear

axle or under the rear floor.

• Only use the points specified on

page 217.

IB924

Position for jack

IB1538

Positioning the jack

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Saab 9-3 - 2002 in the language / languages: English as an attachment in your email.

The manual is 11,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Saab 9-3 - 2002 Manual

Product: