Manual Ryobi RPW36120HI (page 5 of 32) (English)

733420

Zoom out

Zoom in

1/32

■ Make sure the air in the hose and pump

is released before you turn on the product.

To remove the air in the hose and pump,

connect the water supply to the pump

using a garden hose, connect the trigger

handle to pump using the high-pressure

hose, disengage the trigger handle lock,

and press the trigger until there is a steady

flow.

■ Exercise caution to avoid slipping or falling.

■ Keep firm footing and balance. Do not

overreach. Overreaching can result in loss

of balance.

■ Only use accessories that are

recommended by the manufacturer. The

use of improper accessories may cause

injury.

■ Never leave the product running

unattended. Turn the product off. Do

not leave the product until it comes to a

complete stop.

■ Be familiar with the controls. Know how to

stop the product and bleed the pressure

quickly.

■ Stay alert and exercise control. Watch what

you are doing and use common sense.

■ Do not use the product when you are tired,

ill, or under the influence of drugs, alcohol,

or medication. A moment of inattention

while operating the product may result in

serious personal injury.

■ Do not use the product if the switch does not

turn it on and off. Any product that cannot

be controlled with a switch is dangerous

and must be repaired.

■ Keep a minimum distance of 30 cm when

cleaning vehicles. The high-pressure jet

may damage or burst vehicle tires and/or

tire valves.

RESIDUAL RISKS

Even when the product is used as prescribed,

it is still impossible to completely eliminate

certain residual risk factors. The following

hazards may arise in use and the operator

should pay special attention to avoid the

following:

■ Injury caused by the high-pressure jet

– Avoid pointing the high-pressure jet to

people, animals, and to yourself.

■ Injury caused by kickback

– Always hold the handle or the trigger

wand firmly with your two hands.

■ Injury caused by inhalation of aerosols

– Wear appropriate respiratory mask.

■ Injury caused by exposure to noise

– Wear ear protection.

RISK REDUCTION

It has been reported that vibrations from

handheld tools may contribute to a condition

called Raynaud’s Syndrome. Symptoms may

include tingling, numbness, and blanching of

the ngers, usually apparent upon exposure

to cold. Hereditary factors, exposure to cold

and dampness, diet, smoking, and work

practices are all thought to contribute to the

development of these symptoms. There are

measures that can be taken by the operator to

possibly reduce the effects of vibration:

■ Keep your body warm in cold weather.

When operating the product, wear gloves

to keep the hands and wrists warm.

■ After each period of operation, exercise to

increase blood circulation.

■ Take frequent work breaks. Limit the

amount of exposure per day.

If you experience any of the symptoms of this

condition, immediately discontinue use and

see your physician.

WARNING

Injuries may be caused, or aggravated, by

prolonged use of a tool. When using any

tool for prolonged periods, ensure you take

regular breaks.

OPERATION

STARTING AND STOPPING THE PRODUCT

To start the product:

1. Connect the nozzle to spray wand and

connect the spray wand to trigger handle.

2. Connect trigger handle to the water outlet

of high pressure cleaner using the high-

pressure hose.

3. Connect the water inlet of the high

pressure cleaner to the water supply

using a garden hose.

4. Open the trigger to release the air in the

hoses and high pressure cleaner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW36120HI in the language / languages: English as an attachment in your email.

The manual is 7,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ryobi RPW36120HI Manual

Product: