491258
9
Zoom out
Zoom in
Previous page
1/89
Next page
6
GB
English
F
D
E I
P NL
S DK
N
FIN
GR
H CZ RUS PL
RO
SLO TR
HR
GENERAL SAFETY RULES
n Maintain power tools. Check for misalignment
or binding of moving part, breakage of parts and
any other condition that may affect the power tool’s
operation.If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
n Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
n Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardous situation.
Battery tool use and care
n Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
n Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
n When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws or other metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
n Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
Service
n Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
DESCRIPTION
1. Keyless Chuck
2. Switch Trigger
3. Direction of Rotation Selector (Forward/reverse)
4. Screwdriver Bits
5. Magnetic Tray
6. Battery Pack (not included)
7. Latches
8. Depress Latches To Release Battery Pack
9. Torque Adjusting Ring
10. To Decrease Torque
11. To Increase Torque
12. Reverse
13. Forward
14. Unlock (Release)
15. Lock (Tighen)
16. Chuck Jaws
17. High Speed
18. Low Speed
SPECIFICATIONS
Voltage 18 V
Chuck 2-13 mm
Switch Variable speed
No load speed (drill mode):
- Lo speed 0 - 440 min
-1
- Hi speed 0 - 1600 min
-1
Max. Torque 34 Nm
Weight - not incl. battery pack 1.4 kg
Battery pack (not included) BPP-1815M /
BPP-1817M /
BPL-1820
Charger (not included) BC-1800 / BC-1815S/
BCL-1800
OPERATION
TO INSTALL BATTERY PACK (NOT INCLUDED)
n Lock switch trigger on your drill by placing the
direction of rotation selector in center position (Fig. 4).
n Place battery pack in your drill. Align raised rib on
battery pack with groove inside drill (Fig. 2).
n Make sure the latches on battery pack snap in place
and battery pack is secured in drill before beginning
operation.
TO REMOVE BATTERY PACK (NOT INCLUDED)
n Lock switch trigger on your drill by placing the
direction of rotation selector in center position (Fig. 4).
n Locate latches of battery pack and depress to release
battery pack from your drill (Fig. 2).
n Remove battery pack from your drill.
961067016-02.indd 9961067016-02.indd 9 3/24/08 4:46:17 PM3/24/08 4:46:17 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi LDD 1802 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi LDD 1802 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info