391198

Ryobi eag 8011 Manual

7
Zoom out
Zoom in
Previous page
1/70
Next page
THANK YOU FOR BUYING A RYOBI PRODUCT.
To ensure your safety and satisfaction, carefully read
through this OWNER’S MANUAL and the SAFETY
INSTRUCTIONS before using the product.
INSTRUCTIONS FOR SAFE HANDLING
■ Make sure that the tool is only connected to the
voltage marked on the name plate.
■ Never use the tool if its cover or any bolts are missing.
If the cover or bolts have been removed, replace them
prior to use. Maintain all parts in good working order.
■ Always secure tools when working in elevated
positions.
■ Never touch the blade, grinding wheel or other
moving parts during use.
■ Never start a tool when its rotating component is in
contact with the work piece.
■ Never lay a tool down before its moving parts have
come to a complete stop.
■ ACCESSORIES: The use of accessories or
attachments other than those recommended in this
manual might present a hazard.
■ REPLACEMENT PARTS: When servicing use only
identical replacement parts.
ANGLE GRINDER SAFETY PRECAUTIONS
■ Check that the speed marked on the grinding wheel is
equal to or greater than the rated speed of the tool.
■ Ensure that the dimensions of the grinding wheel are
compatible with the tool and that the wheel fits
the spindle.
■ Grinding wheels must be stored in a dry place.
■ Grinding wheels must not be used for any operation
other than grinding.
■ Grinding wheels must be stored and handled with care
in accordance with the manufacturer’s instruction.
■ Inspect the grinding wheel before use to ensure that it is
not chipped or cracked. Chips or cracks can cause the
wheels to shatter, resulting in possible serious injury.
■ Ensure that the wheel is fitted in accordance with
this manual.
■ Ensure that the grinding wheel is correctly mounted
and tightened before use and run the tool at
no-load speed for 30 seconds in a safe position.
Stop immediately if there is considerable vibration or
if other defects are detected. If this condition occurs,
check the tool to determine the cause.
■ Do not use separate reducing bushings or adapters to
adapt large hole grinding wheels.
■ Check that the work piece is properly supported.
■ Use only grinding wheels approved by authorized
service centre
■ Ensure that sparks resulting from use do not create
a hazard e.g. do not hit people, or ignite flammable
substances.
■ Always use protective safety glasses and ear
protectors.
■ Use other personal protective equipment such as
gloves, apron and helmet when necessary.
■ Never place the tool on the floor or other surfaces
while it is running.
■ Grinding wheels continue to rotate after the tool is
switched off.
■ Never touch the wheel or place it on the floor or other
surfaces while it is rotating.
■ The flange and clamp nut must have same outer
diameter.
■ Do not remove the soft paper in the center of the
grinding wheel. (If the paper has been previously
removed, insert some soft paper or rubber between
grinding wheel and flange.)
■ Use the tool only for approved applications. Never
use coolants or water or use the tool as a fixed tool.
■ Grip the tool securely with both hands while operating.
SPECIFICATIONS
EAG-8011 EAG-8012
Grinding wheel 115 mm (4-1/2”) 125 mm (5")
Voltage* 230 V ~ 50 Hz 230 V ~ 50 Hz
Input 800 W 800 W
Spindle thread M14 M14
No load speed 11,000 min
-1
11,000 min
-1
Overall length 310 mm 310 mm
Net weight 2.35 kg 2.35 kg
* Be sure to check the nameplate on the product,
because the voltage is subject to change depending
on the area in which the product is to be used.
Maximum circumferential speed of grinding wheel:
4,800 m/min.
Example of calculation:
4,320 = 3.14 x 125 x 11,000 / 1,000
4,320: Circumferential speed of grinding wheel
125: Wheel diameter
11,000: No load speed of grinder
4
GB
English
F D E I P NL S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
EAG-8011-8012_20 lgs 10/08/05 11:19 Page 4
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi eag 8011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi eag 8011 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info