390832
22
Zoom out
Zoom in
Previous page
1/68
Next page
TECHNISCHE GEGEVENS
Maximum omtreksnelheid van de schijf: 4.800 m/min
Rekenvoorbeeld:
4.695 = 3,14 x 320 x 6.500 / 1.000
4.695: Omtreksnelheid van de schijf
230: Schijf-diameter
6.500: Onbelast toerental van de slijper
BENAMING
1. Afbraamschijf
2. Beschermkap
3. Hulphandgreep
4. Vergrendelknop van handgreep
5. Aan/uit-drukschakelaar
6. Ontgrendelknop van de aan/uit-drukschakelaar
7. Buitenflens
8. Flens
9. Aandrijfas
10. Speciale sleutel
11. Asvergrendelingsknop
12. Hendel van de vergrendeling van de beschermkap
13. Netspanningsverklikker
STANDAARD ACCESSOIRES
Hulphandgreep (3).
Voor sommige landen behoort ook een afbraamschijf tot
de standaard accessoires.
TOEPASSINGEN
Gebruik uw slijper uitsluitend voor de hieronder vermelde
toepassingen:
- Afbraamwerk
GELUIDSDRUK
Het niveau van de geluidsdruk op de werkplek kan de
85 dB (A) overschrijden. In dat geval moet de gebruiker
de nodige voorzieningen treffen op het gebied van
geluidsisolatie en gehoorbescherming.
HET APPARAAT AAN- EN UITZETTEN
Zo zet u de machine AAN: druk met uw wijsvinger de
ontgrendelknop (6) van de drukschakelaar in en druk
daarna de drukschakelaar (5) zelf in.
Zo zet u de machine UIT: laat de aan/uit-
drukschakelaar (5) gewoon los.
BESCHERMKAP
Zet de hendel (12) van de vergrendeling van de
beschermkap open en plaats de beschermkap (2) daarna
in de gewenste stand. U kunt de beschermkap maximaal
90° rechtsom of 90° linksom verdraaien. Daarbuiten kan
de kap niet meer goed worden vergrendeld.
EEN AFBRAAMSCHIJF INSTALLEREN
Monteer de schijfflens (8), de afbraamschijf (1) en de
buitenflens (7) op de aandrijfas (9).
Controleer of de flens de schijf in de juiste stand op
de as is geschoven.
Houd de asvergrendelingsknop (11) die zich op het
tandwielhuis bevindt, ingedrukt.
Draai de buitenflens rechtsom vast met behulp van
de bijgeleverde speciale sleutel (10).
WAARSCHUWING
Controleer nauwlettend of de schijf geen
scheuren vertoont. Vervang een gescheurde
schijf onmiddellijk.
GEBRUIK (AFB. 3)
DE BESCHERMKAPPEN MOETEN ALTIJD OP
HUN PLAATS ZITTEN.
LAAT DE VENTILATIEOPENINGEN VRIJ
ZODAT DE MOTOR VOLDOENDE KOELING
KRIJGT.
Voor de goede werking is het belangrijk dat u let op
hoeveel druk u op het apparaat uitoefent en dat u let op
het contactoppervlak tussen de schijf en het werkstuk.
Om platte oppervlakken af te bramen moet de slijper
onder een scherpe hoek, in het algemeen tussen 10°
en 20°, staan ten opzichte van het werkstuk. Wacht tot
de motor het maximale toerental heeft bereikt voordat u
met slijpen begint. Door een te grote slijphoek komt er
een veel druk op een klein oppervlak: dit zou het
werkoppervlak kunnen doen insnijden of verbranden.
NETSPANNINGSVERKLIKKER
Het apparaat is voorzien van een netspanningsverklikker
(13) die gaat branden zodra het apparaat op een
stopcontact is aangesloten. Dit controlelampje dient om u
te waarschuwen dat het apparaat onder spanning staat
en dat het apparaat gaat werken zodra u op de
drukschakelaar drukt.
19
NL
Nederlands
F GB D E I P S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
EAG-2023CN_20 lgs 1/09/05 10:14 Page 19
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi eag 2023 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi eag 2023 c in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info