705881
4
Zoom out
Zoom in
Previous page
1/76
Next page
4
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been supervised/
instructed and understand the hazards involved. Children must not use or play
with the appliance.Keep the appliance and cable out of reach of children.
c To avoid injury, take care handling the blades, emptying the jug, and cleaning.
h Don’t add hot liquid (over 40°C), as it may be ejected due to sudden steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualied, to avoid hazard.
Don’t put the motor unit in liquid.
Switch o (0) before tting the jug to the motor unit.
Switch o (0), and wait till the blades come to a stop before removing the lid from the jug, or
removing the jug from the motor unit.
Don’t put utensils into the jug while the appliance is plugged in.
Don’t use accessories or attachments other than those we supply.
Don’t use the appliance for any purpose other than those described in these instructions.
Don’t operate the appliance if its damaged or malfunctions.
Don’t run the motor continuously for more than 1 minute, it may overheat. After 1 minute switch o
for at least 2 minutes, to recover.
HOUSEHOLD USE ONLY
PARTS
1. Speed control
2. Gauge
3. Motor unit
4. Spindle
5. Blender jug
6. Bowl
7. Drive shaft
8. Chopping blade
9. Mixer attachment
10. Creamer attachment
11. Tab
12. Lid
13. Tube
14. Pusher
15. Disc
16. Cap
` dishwasher safe
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
GAUGE
The gauge shows the speed of the blade in rpm (revolutions per minute).
The top row of gures show the speed with the jug or bowl empty.
The bottom row of gures show the speed with the jug or bowl full (to the max mark).
GENERAL OPERATION
1. Sit the motor unit on a dry, rm, level surface.
2. Route the cable so it doesn’t overhang, and won’t trip or catch.
3. Assemble the unit, and t any accessories requried according to how you want to use it.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 25182-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 25182-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info