705876
4
Zoom out
Zoom in
Previous page
1/72
Next page
4
7. Lower the blade unit into the motor unit.
8. Turn the blade unit clockwise to lock it into the motor unit (Fig B).
9. Turn the speed control to the speed you want (1 = low, 2 = high).
10. Turn the speed control back to 0 to turn the motor o.
11. Turn the blade unit anti-clockwise to unlock it.
12. Once nished, lift the bottle o the motor unit, turn it upright, unscrew the blade unit then
screw the lid onto of the bottle.
13. Flip the cap on the lid open to pour, press it closed to store.
USING THE COOLING TUBE
The cooling tube helps to keep your drink cooler and fresher for longer.
1. Open the cooling tube screw cap and ll the tube with water to the MAX mark on the tube.
2. Replace the screw cap.
3. Place the cooling tube in the freezer (or freezer compartment of your fridge) until the water
inside has frozen.
4. Once frozen, screw the cooling tube into the underside of the lid (FIG B)
5. Follow the previous instrctions to make your drink and once made, t the lid and cooling
tube to the bottle. Remember, when using the cooling tube only ll the bottle up to the
cooling tube MAX marking (
MA
X
).
CARE AND MAINTENANCE
1. Unplug the appliance.
2. Wipe the the motor unit with a damp cloth.
3. Remove the seal with something blunt, like the handle of a fork.
4. Hand wash the removable parts.
5. Press the seal back into place with something blunt, like the handle of a fork.
¬ You may wash these parts in the top rack of a dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will aect the surface
nishes. The damage should be cosmetic only, and should not aect the operation of the
appliance.
RECYCLING
W
To avoid environmental and health problems due to hazardous substances,
appliances and rechargeable and non-rechargeable batteries marked with
one of these symbols must not be disposed of with unsorted municipal
waste. Always dispose of electrical and electronic products and, where
applicable, rechargeable and non-rechargeable batteries, at an appropriate
ocial recycling/collection point.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 25161-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 25161-56 in the language / languages: All languages as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info