643891

Russell Hobbs 23300-56 Manual

4
Zoom out
Zoom in
Previous page
1/92
Next page
4
Label marking Dot setting
l hot – cotton, linen
•••/max
i do not iron
-
If the instructions on the fabric label differ from this guide, follow the instructions on the label.
FILLING
You may use the iron with tap-water, but if you live in a hard water area, you should use distilled
water (not chemically descaled or softened water). If you buy distilled water, check that it’s
suitable for use in irons.
1. Open the water inlet cover.
2. Pour slowly, to let the air in the reservoir escape, otherwise you’ll cause an air lock and the
water will overflow.
3. Don’t fill past max, or water will escape during use.
4. Wipe up any spillage.
HEATING YOUR IRON
Your iron is heated by placing it onto the stand. The smart status light will show you when you
need to reheat your iron and when it is ready to use. The smart status light operates as follows:
Smart Status Light Remarks
Steady red Your iron is heating up
Flashing green Your iron is ready to use
Flashing red
Your iron needs reheating but you can carry on ironing for a little
longer
Flashing red, 3 beeps Your iron must be reheated as soon as possible
Slowly pulsing red Auto shut-off activated
Important Note:
Between ironing tasks always put the iron back onto the stand. This ensures the most efficient
heating and gives you the best performance from your iron.
1. Set the temperature control to the setting you require.
2. Put the iron onto the stand and plug the stand into the power socket (switch the socket on,
if it’s switchable). The smart status light will light up red and your iron will start to heat up.
3. When the smart status light flashes green your iron is ready to use.
STEAM IRONING
1. To steam iron, set the temperature control to l or higher.
2. Set the steam control to the setting you want, n = no steam, h= high steam.
3. When the smart status light flashes green your iron is ready to use.
SPRAY
Water spotting affects some fabrics. Test this out first on a hidden part of the fabric.
1. Lift the iron off the fabric.
2. Aim the spray nozzle at the fabric.
3. Press the sbutton – you may have to press it 2 or 3 times to pump water through the
system.
SHOT OF STEAM
1. Steam is available when the temperature control is at l or above.
2. Lift the iron off the fabric.
3. Press the hbutton.
4. Leave 4 seconds between shots, to let the temperature build up.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 23300-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23300-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info