705557

Russell Hobbs 23241-56 Manual

4
Zoom out
Zoom in
Previous page
1/76
Next page
4
FILLING
1. Remove the carafe from the hotplate.
2. Open the lid.
3. Fill the reservoir with the exact amount of water required. Note that the brewing process will use all
of the water that you put in the reservoir.
4. Make sure that the filter holder is pressed down all the way into position. It will click when correctly
installed.
5. Put a #4 paper filter into the filter holder.
6. The reservoir is calibrated to give 14 large cups (at 125ml per cup) and 21 small cups (at 83ml per cup).
For each large cup, add 6g of ground filter coffee and for each small cup add 4g.
7. Close the lid.
8. Replace the carafe on the hotplate.
SET THE CLOCK
It isn’t neccessary to set the clock to use your coffee maker but you will need to set it if you want to use
the timer functions.
1. Put the plug into the power socket.
2. Use the h and min buttons to set the correct time in 24 hour format.
• The clock will retain its settings until the coffee maker is unplugged.
COFFEE STRENGTH
Pressing the 1-4 button will make the brewed coffee slightly stronger. You can also use it if you are only
brewing a partial carafe of coffee (i.e. not completely filling the reservoir). Your coffee maker will then alter
the brewing process so your coffee will have about the same strength as it would if you had made a full
carafe.
MAKING COFFEE
Note: If you want to use the coffee strength feature press the 1-4 button before pressing the ] button.
The 1-4 button will light up.
1. Press the ] button – the 1 icon will appear on the display. The ] button will light up.
2. Shortly afterwards, coffee will start to drip into the carafe.
3. If you want to stop the coffee maker while it’s brewing, press the ] button.
4. Once brewed, the hotplate will keep the carafe warm for up to 40 minutes.
USING THE TIMER
Note: Make sure the clock is set to the correct time. Use the h and min buttons.
1. Set the timer to the time you want to start brewing.
a) Press the T button .
b) Use the h and min buttons to set the time you want brewing to start.
If you don’t press either the h or min buttons within 5 seconds, the coffee maker will revert to
“normal”, and the current time will show. Press the T button to start again.
2. When the time is programmed, press the ] button. The T button will light up and the T icon will
appear on the display. Your coffee maker is now set to make coffee at the selected time.
3. If you want to use the coffee strength feature when using the timer, press the 1-4 button now. The
1-4 button will light up.
• If you want to cancel the timer before brewing has started, press the ] button.
• If you want to stop the coffee maker while it’s brewing, press the ] button.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 23241-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23241-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info