705901
2
Zoom out
Zoom in
Previous page
1/2
Next page
Read the instructions, keep them safe, pass them on if you pass the kettle on.
Remove all packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge if they
have been supervised/instructed
and understand the hazards
involved.
Keep the appliance and cable out of
reach of children. They must not use
or play with it.
Misuse of the appliance may cause
injury.
Unplug before assembly,
disassembly, or cleaning.
Don’t leave the appliance
unattended while plugged in.
If the cable is damaged, return the
appliance, to avoid hazard.
H Do not use this appliance near bathtubs, showers, basins or other
vessels containing water.
Don’t use the wand in hot oil – even moderately hot oil can cause
a nasty burn.
Don’t try to chip ice, or chop raw meat.
Don’t use the blender for any purpose other than those described
in these instructions.
Don’t use the blender if it’s damaged or malfunctions.
Never leave the blender resting in the pan because the bottom of
the pan could still be very hot and damage the blender.
Don’t run the motor for more than 1 minute, rest it for 2 minutes
before using it again.
HOUSEHOLD USE ONLY
PARTS
1. Low (I)
2. High (II)
3. Handle
4. Wand
5. Blade
FITTING THE WAND
1. Unplug the appliance.
2. Push the wand on to the end of the handle, and turn it clockwise.
3. To remove, turn it anti-clockwise, then pull it off the handle.
USING
Generally, the wand can do anything a normal blender can do. Make
milkshakes, smoothies, or mayonnaise in a beaker. Purée ingredients
in the pan you cook them in.
Don’t immerse the wand past its junction with the handle.
Whatever container you use, make sure it’s on a stable, flat
surface, and support it with your free hand, to prevent it moving.
1. Put the plug into the power socket.
2. Press the low (I) button for low speed, release it to switch off.
3. Press the high (II) button for high speed, release it to switch off.
Large quantities, thick mixes, and a high ratio of solids to liquids
require longer timings and slower speeds.
Smaller quantities, thinner mixes, and more liquids than solids
require shorter timings and higher speeds.
To avoid spray/splashing:
Keep the wand vertical.
Don’t switch on till it’s inside the container.
Switch off before removing it.
With liquids, switch on and off with the blade under the surface.
HOT LIQUIDS
If blending hot liquids in a pan, always remove the pan from the heat
and allow it to cool down a little before blending.
When using in hot liquids, don’t let the blade break the surface at an
angle, you may spray hot liquid outside the container.
Don’t use the wand in hot oil. Splashes from even moderately hot oil
cause nasty burns.
e
f
g
i
j
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 22241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 22241 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info