Manual Russell Hobbs 21800-56 CLEAN CLEAR PRO (page 67 of 72) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

581132

Zoom out

Zoom in

1/72

[

C FIT THE BLADE

14 Use the wide blade for large areas, use the narrow blade for smaller areas, or where access is

restricted.

15 Press the latch, push the blade into the support, then release the latch.

C IN USE

16 Apply the detergent to the surface to be cleaned.

17 Wipe or rub the detergent over the surface as you normally would.

18 Press the trigger to run the motor, press again to stop.

19 Use the blade as a squeegee, in slow arcs, like the action of a car windscreen wiper.

20 The water/liquid from the surface being cleaned, will be sucked into the reservoir.

21 When the contents of the reservoir reach the max mark:

a) stop the motor

b) pull the bung away from the reservoir, to expose the drain hole

c) empty the reservoir via the exposed drain hole

d) replace the bung

e) carry on cleaning

22 When you’ve ﬁnished, buﬀ the surface with a lint-free cloth.

, If the light starts to blink, it means the battery is getting low – ﬁnish the surface you’re

working on, and recharge the battery.

•After about 5 minutes, the appliance will shut down.

C AFTER USE

23 Switch the appliance oﬀ.

24 Press the latch, and pull the blade into the support

25 Squeeze the latches on either side of the support, and lift it oﬀ the motor unit.

26 Lift the reservoir oﬀ the motor unit.

C CARE AND MAINTENANCE

27 Empty the reservoir and rinse it out.

28 Rinse the blade(s) under a running tap.

29 Wipe all surfaces with a clean damp cloth.

30 Let the reservoir and blade(s) air dry before reassembling the appliance.

C REASSEMBLY

31 Fit the reservoir into the motor unit.

32 Fit the support to the combined motor unit/reservoir.

H DISPOSAL

33 Sadly, nothing lasts forever, and the day will come when your appliance comes to the end of

its natural life.

34 The appliance contains a battery, which must be removed from the appliance, and recycled,

or disposed of in an environmentally friendly way.

35 Your local authority should have a centre which accepts such waste for recycling.

36 To remove the battery (see back page):

1 Disassemble the appliance.

2 Unscrew the 4 screws holding the motor unit together, and split the casing.

instructions

diagrams

1 narrow blade

2 wide blade

3 latch

4 support

5 bung

6 reservoir

7 trigger

8 handle

9 light

10 power inlet

11 connector

12 motor unit

= screw

X battery

< cut here

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 21800-56 CLEAN CLEAR PRO in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 21800-56 CLEAN CLEAR PRO Manual

Product: