709934

Russell Hobbs 20760-57 Manual

4
Zoom out
Zoom in
Previous page
1/80
Next page
4
PREPARING THE FILTER CARTRIDGE
You can find more information about BRITA® filter cartridges and the BRITA® Memo in the BRITA®
Information Guide supplied with the kettle.
1. Press the lid lock to open the lid.
2. To remove a used filter cartridge, hold the funnel firmly with one hand, grip the ring-pull with the
other hand, and pull the filter cartridge up and out.
3. Remove all packaging from the new filter cartridge.
4. Don’t worry if the inside of the packaging is damp – it’s just condensation.
5. There might be black carbon particles in the packaging or on the filter cartridge. Don’t worry, they’re
harmless.
6. To ensure efficient operation, all air must be removed from the filter cartridge.
7. Submerge the filter cartridge in a bowl of cold water and shake it gently till no more bubbles are
released.
8. You may notice some black carbon particles floating in the water. Again, don’t worry, they’re harmless.
9. Before first use, you must flush the filter cartridge.
10. Push the filter cartridge into the funnel till it won’t go any further.
11. Fill the funnel quickly.
12. Fill it again when it empties.
13. This should fill the kettle to about the max mark.
14. Discard the water, and repeat the operation.
15. When you’ve discarded two lots of water, the filter cartridge is ready for use.
RESET THE BRITA® MEMO
This shows what proportion of the filter cartridge’s 4 week life is left.
1. Press and hold the START button till all 4 bars appear and flash twice, then let go.
2. Every week, one bar will disappear.
3. When all 4 bars disappear, a flashing arrow will appear at the top of the display. This means it’s time
to replace the filter cartridge.
4. When the display gets down to one bar, it’s a good idea to check that you’ve got another filter
cartridge available. If you haven’t, it’s time to buy some.
5. The flashing dot at the bottom right of the display shows that the Memo is working.
HOLIDAYS
If you haven’t used the kettle for a few days:
• empty the kettle and rinse it out
• flush the filter cartridge (see points 10-15)
FILLING
1. Press the lid lock to open the lid.
2. Fill with at least 2 cups of water, but not above max.
3. Fill the funnel quickly.
4. Fill it again when it empties.
5. This should fill the kettle to about the max mark.
6. If the water level is above the max mark, pour some water out of the kettle.
7. Close the lid, and press down to lock it.
SWITCHING ON
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I. The light will come on, and the kettle will heat up.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20760-57 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20760-57 in the language / languages: All languages as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info