581103

Russell Hobbs 20240-56 ILLUMINA FOODPROCESSOR Manual

3
Zoom out
Zoom in
Previous page
1/92
Next page
3
•Keep the appliance and cable out of reach of children.
& To avoid injury, take care handling the blades, emptying the jug,
and cleaning.
$ Do not add hot liquid (over 40°C), as it may be ejected due to
sudden steaming.
2 Misuse of the appliance may cause injury.
3 Unplug the appliance before assembly, disassembly, or cleaning.
4 Unplug the appliance before fitting or removing attachments.
5 Don’t leave the appliance unattended while plugged in.
6 If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
H Don’t put the motor unit in liquid.
7 Switch off (Y) before fitting the jug to the motor unit.
8 Switch off (Y), and wait till the blades come to a stop before removing the lid from the jug,
or removing the jug from the motor unit.
9 Don’t put utensils into the jug while the appliance is plugged in.
10 Don’t use accessories or attachments other than those we supply.
11 Don’t use the appliance for any purpose other than those described in these instructions.
12 Don’t operate the appliance if it’s damaged or malfunctions.
13 Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch off for at least 2 minutes, to recover.
household use only
O USING THE PROCESSOR
1 Sit the motor unit on a dry, firm, level surface, near a power socket.
2 Fit the spindle to the top of the motor unit.
3 Align the d on the bottom of the jug with the U on the motor unit.
4 Lower the jug on to the motor unit, then turn the jug to align the d with the L.
5 Choose the attachment you need.
r WITH THE SUPPORT
6 Use the chopper for pulverizing ingredients.
7 Use the mixer to mix ingredients together.
8 Use the creamer to thicken cream, to beat eggs, and to cream eggs and sugar together.
9 Fit the attachment over the support, and slide it to the bottom.
10 Lower the support into the centre of the jug, over the spindle.
11 Put the ingredients into the jug.
12 If you’re using just liquids, don’t fill the jug past the K mark.
• If you’re using solids, or a mixture of liquids and solids, don’t fill the jug past the MAX mark.
instructions
diagrams
4 speed control
5 motor unit
6 light
7 spindle
8 jug
9 handle
10 support
11 chopper
12 mixer
13 creamer
14 lid
15 safety switch
16 tube
17 pusher
18 disc
19 fine grater
20 slicer
21 coarse grater
22 cap
` dishwasher safe
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20240-56 ILLUMINA FOODPROCESSOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20240-56 ILLUMINA FOODPROCESSOR in the language / languages: All languages as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info