561307
5
Zoom out
Zoom in
Previous page
1/96
Next page
5
f) Use the h and min buttons to set the correct hour and minute.
g) If you don’t press all the buttons within 10 seconds, the coffee maker will revert to
“normal”, and the time will show.
h) You’ll have to press the T button, and start again.
C ACTIVATION
34 Press and release the T button. The T light will stop flashing, and glow steadily.
35 If you want to cancel the timer before brewing has started, press the T button.
C LEAVE IT ALONE
36 Thats it – leave it alone till the preset time comes round, and it makes your coffee – don’t
fiddle with it, you might upset it.
C FINISHED?
37 Check that neither “T” nor “i” are showing on the display.
38 If either is showing, press and release the T or i button to remove it.
C A QUICK CUP
39 You can remove the carafe at any time. To prevent the filter holder overowing, replace the
carafe on the hotplate within about 20 seconds.
C CARE AND MAINTENANCE
40 Unplug the appliance when not in use, before moving and before cleaning.
41 Tip the contents of the filter holder into the bin.
42 You may clean the carafe and filter holder in warm soapy water. Rinse thoroughly afterwards,
to remove all traces of soap.
43 Press the lever at the rear of the carafe lid, above the handle, to open the carafe lid.
44 Clean the outside surfaces of the appliance with a damp cloth.
45 Clean the inside of the coffee mill with the brush.
46 Use the sharp end of the brush to turn the screw to U, to unlock in front of the coffee mill, and
lift the cover.
47 Clean the inside with the brush, then press the cover down and turn the screw to L to lock it
closed.
48 Don’t put any part of the appliance in a dishwasher.
L If you see this icon on the display, unplug the appliance, check it, then try again.
E01 If you see this message on the display, unplug the appliance, open the cover, clean out any
coffee that may have backed up, close the cover, and try again.
[ Jump to point 46.
K If you leave the appliance plugged in, it will count 70 brewing cycles, then show K in the
display to show that it wants descaling.
K Press the 2-12 button and the ggg buttons together, to remove K from the display.
C DESCALING
49 Descale regularly. Use a proprietary brand of descaler suitable for use in plastic-bodied
products. Follow the instructions on the package of descaler.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
a
instructions – more detailed instructions are available on our website:
http://www.russellhobbs.com/ifu/550979
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20060-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20060-56 in the language / languages: All languages as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info