509791
2
Zoom out
Zoom in
Previous page
1/48
Next page
2
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by a responsible adult. Use and store the appliance out of
reach of children.
2 Don’t put the handle in liquid, don’t use it in a bathroom, near water, or outdoors.
3 The wand blade is sharp and it rotates at high speed.
4 So, to avoid serious injury:
a) don’t switch on till the blade is inside the food container
b) switch off before lifting the blade from the food container
c) don’t touch the blade – even when cleaning
d) don’t plug in till just before use
e) unplug immediately after use
f) don’t leave the appliance unattended while plugged in
5 Don’t use the wand in hot oil – even moderately hot oil can cause a nasty burn.
6 Don’t try to chip ice, don’t try to chop raw meat, and take great care with the blades.
7 Unplug the appliance before fitting or removing attachments.
8 Don’t fit an attachment or accessory other than those we supply.
9 Don’t use the appliance for any purpose other than those described in these instructions.
10 Don’t wrap the cable round the appliance.
11 Don’t operate the appliance if it’s damaged or malfunctions.
12 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
5 FITTING/REMOVING ATTACHMENTS
1 Unplug the appliance.
2 To fit the wand, push it on to the end of the handle, and turn it anti-clockwise.
3 To remove the wand, turn it clockwise, then pull the wand off the handle.
C THE SPEED BUTTONS
4 Put the plug into the power socket.
5 Press the top button for low speed, release it to switch off.
6 Press the bottom button for high speed, release it to switch off.
7 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
8 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and
higher speeds.
9 Don’t run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off for
at least 2 minutes, to let the motor cool.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 19430-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 19430-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info