536394
3
Zoom out
Zoom in
Previous page
1/92
Next page
3
10 Don’t let the jug overflow. If liquid gets under the motor unit, it may be sucked into the motor,
damaging it.
11 Don’t use accessories or attachments other than those we supply.
12 Don’t use the appliance for any purpose other than those described in these instructions.
13 Don’t operate the appliance if it’s damaged or malfunctions.
14 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
C SWITCH ON
1 Sit the motor unit on a dry, firm, level surface, near a power socket.
2 Check that the speed control is set to 0.
3 Put the plug into the power socket.
C SPEED CONTROL
4 Turn the speed control to the speed you want (1 = low, 2 = high).
5 Turn the speed control back to 0 to turn the motor off.
6 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
7 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and
higher speeds.
8 Don’t run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off for
at least 2 minutes, to let the motor cool.
Y PULSE
9 Turning the speed control anti-clockwise to Y will give you a short burst at high speed. In
this direction, the knob is spring-loaded. When you let go, it’ll return to 0.
N USING THE BLENDER
10 Align the d on the bottom of the jug with the U on the motor unit.
11 Lower the jug on to the motor unit, then turn the jug to align the d with the L.
12 Press the lever to open the lid.
13 Put the ingredients into the jug.
14 Don’t fill past the 1500ml mark. If you do, the contents may force the lid off when you start
the motor.
15 Close the lid.
16 Align the pips on the cap with the slots in the hole, fit the cap, and turn it clockwise to lock it.
17 To add ingredients while the blender is working, remove the cap, pour the new ingredients
through the hole, then replace the cap.
18 Check that the added ingredients don’t push the volume in the jug past the 1500ml mark.
instructions
diagrams
0 off
1 low
2 high
3 speed control
4 motor unit
Y pulse
5 spindle
6 jug
7 handle
8 support
9 mixer
10 chopper
11 blade guard
12 creamer
13 lid
14 tube
15 pusher
16 disc
17 slicer
18 grater
19 tab
20 latch
21 cap
22 hole
23 pips
24 press
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 19000-56 Desire at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 19000-56 Desire in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info