649847
3
Zoom out
Zoom in
Previous page
1/72
Next page
3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved. Children must
not use or play with the appliance.Keep the appliance and cable out of
reach of children.
c To avoid injury, take care handling the blades, emptying the jug, and
cleaning.
h Don’t add hot liquid (over 40°C), as it may be ejected due to sudden
steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
l Don’t put the motor unit in liquid.
Switch off (0) before fitting the jug to the motor unit.
Don’t use accessories or attachments other than those we supply.
Don’t use the appliance for any purpose other than those described in these instructions.
Don’t operate the appliance if its damaged or malfunctions.
Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch off for at least 2 minutes, to recover.
HOUSEHOLD USE ONLY
DIAGRAMS
1. speed control
2. motor unit
3. collar
4. blade unit
5. seal
6. jug
7. lid
8. cap
9. bowl
` dishwasher safe
BEFORE USING FOR THE FIRST TIME
Turn to “CARE AND MAINTENANCE” and clean the appliance, to remove manufacturing dust, etc.
PREPARATION
In use, treat the jug, blade unit, and collar as a single unit.
1. Sit the motor unit on a stable, level surface.
2. Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place (Fig. A).
3. Remove the lid.
4. Put the ingredients into the jug. Don’t fill past the 1500ml mark. If you do, the contents may
force the lid off when you start the motor.
5. Replace the lid.
6. Align the pips on the cap with the slots in the hole in the lid, fit the cap, and turn it
clockwise to lock it.
7. Don’t run the appliance without fitting the cap.
8. Check that the speed control is set to 0.
instructions
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 18995 Aura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18995 Aura in the language / languages: All languages as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info