509712
3
Zoom out
Zoom in
Previous page
1/96
Next page
3
C PREPARATION
5 Check for textile care symbols (i j k l).
6 Iron fabrics needing low temperatures j first, then those that need medium temperatures
k, and finish with those needing high temperatures l.
X FILLING
7 The iron may be used with tap-water, but if you live in a hard-water area, you should use
distilled water (not chemically descaled water).
8 If you buy distilled water, check that it is marketed as suitable for irons.
9 Don’t add anything to the water – you’ll damage the iron.
10 Unplug the appliance.
11 Set the temperature control to . Set the steam control to S.
12 Place the iron on its soleplate.
13 Pull the funnel from the rear of the iron and push it into the water inlet.
14 Pour water into the funnel
15 Pour slowly, to allow the air in the reservoir to escape, and avoid an airlock.
16 Don’t fill past the max mark on the reservoir, or water will escape in use.
17 Wipe up any spillage.
18 Pull the funnel out of the water inlet, and push it into the rear of the iron.
, If you push the funnel too hard, you may jam the valve in the open position.
Press and release the valve to close it (see points 87-90).
C SWITCH ON
19 Set the temperature control to . Set the steam control to S.
20 Sit the iron on its heel.
21 Move the clip to free the cable.
22 Put the plug into the power socket.
23 Turn the temperature control to bring the setting you want (see the guide below) next to the
5 mark. The light will glow.
24 When the iron reaches the set temperature, the light will go off. It will then cycle on and off as
the thermostat operates to maintain the temperature.
temperature setting guide
label marking temperature setting
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures ••
l hot – cotton, linen •••/max
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions on the
label.
C REDUCING TEMPERATURE
25 Reducing temperature takes longer, as the appliance has to lose heat.
26 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 5).
instructions
diagrams
1 temperature control
2 light
3 water inlet
4 spray nozzle
5 steam control
6 soleplate
7 steam vents
8 reservoir
9 clip
10 heel
11 funnel
12 valve
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 18618-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18618-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info