489819
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
26 When you change areas, overlap the previous area, to avoid missing anything.
switch off
27 If you’ve finished, if you want to change the brush height for a different floor covering, if you
want to change from using it upright to using the hose, or if you just want to stop for a cup of
tea, press and release the switch with your toe, to turn the motor o, then push the handle
forward till its fully upright, to lock the base.
using tools
28 Raise the handle to the vertical position, then push it forward, to lock the pillar upright.
29 Turn the brush height control fully clockwise, to prevent the brush continually hitting the
surface it’s sitting on.
30 Raise the handle lock (at the rear of the pillar), and pull the handle out of the pillar.
31 Pull the nozzle out of the base tube, and push it into the rear of the handle.
32 Push the tool you’re going to use into the other end of the handle.
33 Press and release the switch with your toe, to turn the motor on.
choose the tool for the job:
what fits to what?
34 The tools fit into the end of the handle.
35 If you fit the extension tube to the handle, then the remaining tools fit into the end of the
extension tube.
crevice tool to reach down the sides of upholstery, and into awkward spaces, nooks, and
crannies nothing else can reach
extension tube to reach curtain rails, picture rails, and covings
small brush to remove pet hair, lint, and dust from blinds, curtains, and upholstery; to
brush/clean awkward corners
finished cleaning?
36 Press and release the switch with a toe, to turn the motor off.
37 Raise the handle to the vertical position, then push it forward, to lock the pillar upright.
38 Unplug the cleaner (switch the socket off first, if its switchable).
39 Turn the top cable hook up, and wind the cable round both cable hooks.
removing the bin
40 You don’t have to empty the bin after each use, but its a very good idea. You shouldn’t let it
get above the MAX mark.
41 Your cleaner will happily work till its chock full, but you’ll be wasting energy swirling
yesterdays dust around. Energy that could be better used sucking up todays dust.
42 Switch off, unplug, put the handle in the upright position, and leave it for five to ten minutes,
to let the dust settle.
43 Press the bin release button.
44 Use the bin lid handle to pull the top of the bin away from the pillar, then lift the bin up and
away from the cleaner.
45 Lower the bin into your dustbin so the bottom of the bin is below the rim – this’ll prevent the
dust dispersing into your environment.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 18358 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18358 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info