489799
3
Zoom out
Zoom in
Previous page
1/92
Next page
3
C PREPARATION
5 Check for textile care symbols (i j k l).
6 Iron fabrics needing low temperatures j first, then those that need medium temperatures
k, and finish with those needing high temperatures l.
X FILLING
7 The iron may be used with tap-water, but if you live in a hard-water area, you should use
distilled water (not chemically descaled water).
8 If you buy distilled water, check that it is marketed as suitable for irons.
9 Don’t add anything to the water – you’ll damage the iron.
10 Unplug the appliance.
11 Set the temperature control to . Set the steam control to S.
12 Hold the iron with the heel uppermost.
13 Press the V button, and keep it pressed in. This opens the valve
14 Pour water into the heel till it stops disappearing into the reservoir, and starts to back up.
15 Release the V button. This closes the valve.
16 Tip excess water out of the heel.
17 Wipe up any spillage.
C SWITCH ON
18 Set the temperature control to .
19 Sit the iron on its heel.
20 Put the plug into the power socket.
21 Turn the temperature control to bring the setting you want (see the guide below) next to the
5 mark. The light will glow.
22 When the iron reaches the set temperature, the light will go off.
23 It will then cycle on and off as the thermostat operates to maintain the temperature.
temperature setting guide
label marking temperature setting
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures ••
l hot – cotton, linen •••/max
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions on the
label.
C REDUCING TEMPERATURE
24 Reducing temperature takes longer, as the appliance has to lose heat.
25 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 6).
h STEAM IRONING
26 If you intend to use steam, the temperature setting must be S or higher.
27 If you don’t, you’ll get water on your clothes, not steam.
28 Set the steam control to the setting you want (S = no steam, S = low, # = high).
29 Wait till the light goes off, then start ironing.
instructions
diagrams
1 temperature control
5 mark
S steam available
2 light
3 steam control
# high steam
S no steam
4 spray nozzle
5 soleplate
6 steam vents
7 reservoir
8 heel
9 water inlet
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 17877-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 17877-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info